12-07-2022, 07:29 AM | #1 |
Not Yet Wild
Join Date: Nov 2022
Posts: 31
|
Need some clarification on light wiring to 12v reducer
Hi again all,
Everything was going well after my lithium upgrade, but I've recently started blowing the fuse on my lights, both front and rear. I'm wondering if I didn't wire up my 12v reducer to the right wires. They are currently connected to two wires that run along the back of the battery compartment and I thought go to the fuse "area". Should they be attached over at the switch instead? Attached are the two best photos that I think will help, but happy to get any others. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-07-2022, 08:39 AM | #2 |
Gone Wild
Join Date: Sep 2022
Location: Minnesota
Posts: 1,289
|
Re: Need some clarification on light wiring to 12v reducer
Has it been blowing fuses since the reducer was installed or just started recently? Any other 12v stuff connected that isn't blowing a fuse?
Common issue I have seen with reducers is people wire the output - of the reducer to the input - that comes into the reducer from the pack and that is incorrect. |
12-07-2022, 10:59 AM | #3 | |
Not Yet Wild
Join Date: Nov 2022
Posts: 31
|
Re: Need some clarification on light wiring to 12v reducer
Quote:
I double checked it twice before wiring, so pretty sure I got that right, and also just checked again, the red and black are from the battery and the yellow/other black are the 12v outputs. |
|
12-07-2022, 11:00 AM | #4 | |
Gone Wild
Join Date: Sep 2022
Location: Minnesota
Posts: 1,289
|
Re: Need some clarification on light wiring to 12v reducer
Quote:
I would chase wire sounds like you have something shorting out. Does it blow the fuse right away when you put a new one in or does it work for awhile? |
|
12-07-2022, 12:27 PM | #5 |
Not Yet Wild
Join Date: Nov 2022
Posts: 31
|
Re: Need some clarification on light wiring to 12v reducer
Pretty much blows as soon as I turn the key over to the light trigger.
|
12-07-2022, 12:32 PM | #6 |
Gone Wild
Join Date: Sep 2022
Location: Minnesota
Posts: 1,289
|
Re: Need some clarification on light wiring to 12v reducer
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Light Kit wiring clarification | Electric EZGO | |||
Wiring 48V to 12V reducer for led lights with existing light kit | Electric Club Car | |||
48v-12v reducer hookup clarification | Electric EZGO | |||
LED Light bar with Voltage Reducer Wiring Install | Electric EZGO | |||
2004 Precedent light wiring with reducer | Electric Club Car |