|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-07-2020, 12:36 PM | #1 |
Not Yet Wild
Join Date: Jun 2020
Posts: 16
|
Alltrax XCT Programming for Riot Kit
Just installed a riot kit on my G29 and also installed the FN key. I'm assuming I now need to program the controller for each setting on the key???
Is so, does anyone know what parameters each should be set at? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-09-2020, 04:40 PM | #2 |
Not Yet Wild
Join Date: Aug 2020
Posts: 4
|
Re: Alltrax XCT Programming for Riot Kit
Not exactly sure what you’re asking.
Do You have the switch that controls user profiles and motor regen? If so, you need to click on each of the user profiles and set them as you wish. If you have lithium batteries, make sure your regen is pretty much zero. |
08-10-2020, 10:58 AM | #3 |
Gone Wild
Join Date: Oct 2014
Posts: 173
|
Re: Alltrax XCT Programming for Riot Kit
If you bought the Riot Kit from Plowman's, the motor and controller should already be programmed with the correct field map.
|
08-12-2020, 07:16 AM | #4 |
Not Yet Wild
Join Date: Jun 2020
Posts: 16
|
Re: Alltrax XCT Programming for Riot Kit
Spoke to Don yesterday and he walked me through programming each setting to the desired field map. Now I have a kid mode, cruising mode, and drag race mode. Best thing since slices bread and Don is a good guy!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax SR Programming | Electric Club Car | |||
Alltrax programming | Electric Club Car | |||
2013 G29, upgraded to Riot Kit - no green LED on Alltrax | Electric Yamaha | |||
Alltrax Programming | Electric EZGO | |||
alltrax programming | Electric EZGO |