03-16-2009, 07:56 AM | #31 |
Gone Wild
Join Date: Mar 2009
Posts: 256
|
Re: Bending u Bolts on take off!
I was looking at other builds and I found a good pic of what a stock set up looks like compared to my beefier set up for a rear axle.
Stock. My Beefier mod. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-25-2009, 09:32 PM | #32 |
Gone Wild
Join Date: Mar 2009
Posts: 256
|
Re: Bending u Bolts on take off!
I was going thru my photobucket pics and came across some pics of things I have broken. Found pics of broken leaf springs, bent ubolts. Look at these pics and this is what I started the this thread about. I cant believe no one else has had this problem.
Bent UBolts and spring saddles. Broken Leaf spring |
03-28-2009, 08:56 PM | #33 |
The Fabricator
Join Date: Dec 2006
Posts: 2,016
|
Re: Bending u Bolts on take off!
Man looks like that cart is a blast to drive with the kind of power it has. Hope your new u bolt setup is working well for you.
|
03-29-2009, 10:42 PM | #34 |
Gone Wild
Join Date: Mar 2009
Posts: 256
|
Re: Bending u Bolts on take off!
Well, I am about to find out about the power. I am putting more lift on as we speak and got a set of 26 Outlaws for the rear and a set of 26 ITP 589's for the front.
Here are what Outlaws look like. These are 589's |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Conduit bending | Design Center | |||
can the two copper bolts on the forward reverse switch be replaced | Electric EZGO | |||
Any reason not to make u-bolts | Lifted Golf Carts | |||
Where are the transmission refill and drain bolts 04 Club Car DS | Gas Club Car |