11-18-2022, 09:52 AM | #1 |
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,215
|
ElCon charger ZEVA BMS...and a charging "thing"
When I installed my Leaf pack using a ZEVA BMS 16v2 I purchased an ElCon TC 1800 W charger.
I set the pack charge to 57V and since day 1, the pack would charge up 57.3V before finally shutting down. Last night was a different story. The pack was up to 57.5V of charging...and the charger was "trickle" charging at about 2amps. So, instead of waiting to see if my HV relay would trip, I just unplugged the charger. I put in a request to an outfit in California (they did not sell ZEVA's back in 2018 ) and ask if they had any idea what the issue would be. I'll let ya know. Meanwhile, if you have any thoughts on this I'd appreciate any input. I was thinking I could reset the max pack charge from 57V to 56V. I do not have the option of setting pack voltages to anything but "round" numbers. In other words I can't set the charger to shutdown at...say 56.8v. I don't have the option of any partial V settings on the charger. |
|
|
Similar Threads | ||||
Thread | Forum | |||
G2 charging problem. "green wire lowers voltage" | Gas Yamaha | |||
DPI 48V Charger Flashes Charging and switches to "Detection" | Electric EZGO | |||
ZEVA error code "No comms to charger” | Lithium EZGO | |||
The "Swamp Thing" Build | Gas Yamaha | |||
Check this thing out. Another odd ball "cart". | Gas golf carts |