09-01-2019, 08:28 AM | #1 |
Not Yet Wild
Join Date: Jul 2019
Location: Decatur, TX
Posts: 48
|
My Dog is Very Sad - Please comment on this post!!!
Hey y'all looking for a little advice regarding motor mounts.
As you can see my dog is very sad, because he's tired of me swearing at inanimate objects. IMG-0662.jpg I have the engine in, height and width mocked up and inline with the driver/driven clutch. Any suggestions on motor mounts? The space is very tight (oil pan is actually touching the frame), and I still have to squeeze the radiator in there somewhere. IMG-0752.jpg How to mount to the frame? Any dos/don'ts? Any wisdom you can impart? I'm using some scrap steel right now as you can see in the picture circled in red. I would prefer to have something a little more classy looking, stock looking. I am not a fabricator, please all remember this. IMG-0754.jpg Remember this engine came out of a lawn tractor, so it's mounts are a little wonky. The rear mounts on the engine, I can remove if need be and fab new ones. Picture below is the motor mounts on the engine (circled in red). IMG-0650.jpg The picture below is the original mounts from the lawn tractor frame (circled in red) and radiator mounts (circled in green). IMG-0648.jpg Please don't tell me to search the other threads, I don't need that drama in my life. If you have done a diesel swap and have some pictures of the motor mounts you fab'd up, please share. I'm about to lose my s##t on this thing and I've barely started. Thank you!!! |
Tags |
diesel, motor mount, motor mounts |
|
|
Similar Threads | ||||
Thread | Forum | |||
Not another question just a comment | Electric EZGO | |||
Does this sound right?? Charger comment | Electric Club Car | |||
electical,comment please | Electric EZGO |