1997 Yamaha G16E 36V Alltrax SR48500 Wiring

[Joseph Cone]

Replacing stock controller with Alltrax SR48500 on my neighbors 36 Volt (6×6V) 1997 Yamaha G16E . I need to know exactly which wires (color included) go to which terminals in the J1 and J4,J5 area. I'm using Doc110-041 schematic provided but there are a few contradictions between the verbiage in the "Replacing stock controller area" versus the drawing. Example is blue wire from throttle switch....does it go to B- as schematic says? According to drawing:
Throttle white goes to J5
Throttle green goes to J4
Throttle blue goes to B-
Run switch yellow goes to J1 red
Solenoid black goes to J1 black
Reverse switch pink goes to J1 blue
Nothing goes to J1 green.
According to verbiage, throttle Green goes to B-

Am I anywhere close?

[1vahunter]

Any luck on this? I'm in a similar boat as you...trying to get a 1999 G16E running that I got for free. Came with an Alltrax AXE4834 that does power on. Appears to have cheap and non-working solenoid so I just ordered from ScottyB. I've been following this wiring diagram that shows the blue throttle wire unused.

https://alltraxinc.com/wp-content/up...6-wire-dia.pdf