08-18-2021, 11:12 PM | #1 |
Gone Wild
Join Date: Oct 2010
Posts: 527
|
Need 2000 EZGO txt Steering Part
Looking for a part number (or where to find) the small link that connects the upper steering shaft to the steering box in an early txt ('94-2001.5).
I find it listed as part 11 on the steering parts diagrams, but no part number. It serves as a crude universal joint. Small piece of hard steel with two bolt holes. Any assistance is highly appreciated. Seems as I lack "sufficient permissions" to post in EZGO Tech section? Also interested in what the steering shaft (between steering wheel and box) diameter might be? The picture below shows the "link"...just a small thing right in the center of the picture Want to make an adapter in order to attach a Prius EPS steering unit to the txt steering box. I have everything except the small link. Don't want to tear the steering up and be unable to return to stock...should this not work out. These links are not used in 2001.5 and later models. Only used on 3 bolt steering columns, gas and electric. Thanks! Sent from my SM-G965U using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-19-2021, 02:50 AM | #2 |
British born Nincompoop
Join Date: Feb 2007
Location: United Kingdom
Posts: 2,463
|
Re: Need 2000 EZGO txt Steering Part
JRL.
I dont think that part is available separately, or at least i never found one LOL. Considering your skill shown already on your build work, surely you could fabricate a suitable part yourself. Your comment "crude universal joint" suggests to me maybe a modified U/J from a socket set would suffice to trial what you are attempting to do? Otherwise someone may have a spare you could use. |
08-19-2021, 06:20 AM | #3 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Need 2000 EZGO txt Steering Part
I might have one out in an old column, I'll check this morning.
Where are you located? |
08-19-2021, 06:49 AM | #4 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Need 2000 EZGO txt Steering Part
|
08-19-2021, 08:49 AM | #5 | |
Gone Wild
Join Date: Oct 2010
Posts: 527
|
Re: Need 2000 EZGO txt Steering Part
Quote:
Let me know if you have one. I believe these things were used in various EZGO models, gas and electric, '80s up to 2001.5. They were used with the frame mounted rack and pinion. Thanks Yes on the Country Cat diagram. Part 33. That appears correct. I ordered a rack pinion shaft last night. The input end of the shaft looks to be about the size of the smooth bore end of a Borgeson 312500 adaptor. That would make for a very short overall coupling. The other end of the adaptor fits the Prius splines....17mm x 36 x 3/4". Didn't realize that the steering box pinion could be inserted from inside the cart. Cannot believe the low cost for used Prius EPS units? $140 for a nice looking assembly, abd $19 bucks for the controller. Other than hiding the EPS unit beneath the dash, this appears to be quite doable. I'll write it up and add pics. Sent from my SM-G965U using Tapatalk |
|
08-19-2021, 10:54 AM | #6 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Need 2000 EZGO txt Steering Part
Said they don’t stock it but available
|
08-19-2021, 02:31 PM | #7 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Need 2000 EZGO txt Steering Part
Well, I know I have one on a shaft somewhere in my shop but couldn't lay my hands on it today. I'll keep looking just in case you can't get one.
Sorry bout that...... |
08-19-2021, 08:29 PM | #8 |
Gone Wild
Join Date: Oct 2010
Posts: 527
|
Re: Need 2000 EZGO txt Steering Part
Appreciate all the info. I'm back in town and tomorrow will lay everything out and begin a mockup. Now considering using the Prius column. It's a few inches shorter than the TXT, but I'm good with that. Especially with power steering.
The overall shorter (18" vs 24") length gives wiggle room as the EPSA unit's position under the dash isn't as critical. So the joint between the assist and the rack input shaft is no longer critical. Thinking about chopping off the lower txt 3 bolt column and welding a two bolt flange onto the column and create a ridged adaptor mount for the lower end. The column will still require support north of the motor assembly. The Prius steering column is a strong item. Plan to keep that. Plan to cut off all the Toyota mounts and position the motor to the right maybe behind the (or into?) cup holders. May sacrifice the left holder so the motor can be a little bit hidden. My wife's thrilled to have a car part on her kitchen table... Sent from my SM-G965U using Tapatalk |
08-19-2021, 09:01 PM | #9 | |
Gone Wild
Join Date: Oct 2010
Posts: 527
|
Re: Need 2000 EZGO txt Steering Part
Quote:
How's the "shelter in place" lockdowns going across the pond? Delightfully no doubt! No such thing around here. Not yet. And not for trying... Country living is good! Thanks for your input. Fortunately, the shaft fitments are common, and fitting these steering assist units into all sorts of cars, lawn mowers, and a few golf carts (have not seen a cart conversion--seen owners talking about doing so) has created an industry producing myriad adaptors to enable the process. The trick is to find and get the right adaptor before going broke... Considered using a Ford Mustang rag-joint, but moved onto a rigid coupler. The art here is to firm up the plan before cutting anything. I'm still using the cart and wish to keep it functional. Back to work with you! [emoji6] I go in about your mid-day. Almost tea time now! Time flies... Ideas welcomed. Cheers Sent from my SM-G965U using Tapatalk |
|
08-20-2021, 03:33 AM | #10 |
British born Nincompoop
Join Date: Feb 2007
Location: United Kingdom
Posts: 2,463
|
Re: Need 2000 EZGO txt Steering Part
LOL.
Im a gonna be watching this! I took a power steering unit off a Kawasaki mule many years ago and managed to put it onto one of my Monster truck lookalikes for the UK race fraternity. Don't ask how i did it as i simply cant remember. In those days you had to fabricate, cut and shut etc, just about everything you worked with. Cutting two adapters/flanges etc and welding them up to get what you needed. Lockdown has eased a lot recently but a lot of us will continue to wear masks in public. New strains of covid are appearing way too often for my liking. Deaths are on the rise again and we are mentally prepared for another hit. I dont think this is ever going away, just continuously going to mutate. Oh well, I pretty much filled the ticks on my bucket list, so I can go down happy LOL' |
|
|
Similar Threads | ||||
Thread | Forum | |||
2000 EZGO TXT front steering rebuild | Electric EZGO | |||
2000's Ezgo TXT steering broke | Electric EZGO | |||
need ezgo steering part#s | Gas EZGO | |||
(new) 2000 ezgo steering box | Golf Carts and Parts | |||
Need an Ezgo Steering part, Will pay! | Electric EZGO |