|
|
|||||||
| Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
  |
|
|
Thread Tools | Display Modes |
01-24-2021, 04:05 PM
|
#1 |
|
Gone Wild
Join Date: Mar 2013
Posts: 307
|
1996 Cushman Titan solenoid issue
I have a 96 Cushman Titan that has the diode and resistor as a plug in and not on the solenoid. I replaced the resistor since it wasn’t on it when I got it. The resistor gets hot and smells which I believe is Normal to a point.
I get 48 v at the main big post from the battery, 48v at small post closest to main post, when switch is on 48v to other small post, but no voltage to the controller side of solenoid. Any suggestions? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-24-2021, 04:07 PM
|
#2 |
|
Gone Wild
Join Date: Mar 2013
Posts: 307
|
Re: 1996 Cushman Titan solenoid issue
I have attached some of the pictures.
|
|
|
|
|
01-28-2021, 05:39 PM
|
#3 |
|
Gone Wild
Join Date: Mar 2013
Posts: 307
|
Re: 1996 Cushman Titan solenoid issue
So I noticed that the solenoid was a 12v for whatever reason. I replaced it with a 48v and now I’m getting 1.2 bolts on the side that goes to the controller.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Cushman Titan | Electric golf carts | |||
| Troubleshooting a 1996 DCS Controller/Solenoid Issue | Electric EZGO | |||
| Cushman Titan speed issue | Electric EZGO | |||
| cushman titan | Gas EZGO | |||
| Cushman Titan | Electric EZGO | |||
Linear Mode
