Zone Aftermarket Parts and Mods?

78Southwind · 02-18-2010, 04:23 PM

So who’s going to do what to their Zone once they get them? The first thing I want to do is put a trailer hitch on the Zone. For those in the know, how much will these Car(t)s be able to tow? I just want to be able to tow my GTX Sea Doo and maybe launch it. The Sea Doo is about 500lbs plus the weight of a small trailer.

pansser · 02-18-2010, 04:24 PM

roady89 · 02-18-2010, 04:26 PM

It'll pull it. I've pulled mine many times.

pansser · 02-18-2010, 04:42 PM

Quote:

Originally Posted by roady89

I've pulled mine many times.

78Southwind · 02-18-2010, 04:45 PM

Quote:

Originally Posted by roady89

It'll pull it. I've pulled mine many times.

Cool....I thought it would. It's not like I want to pull it 40 miles, I just want to pull it around the campground or to our timeshare launch ramp. This is the hitch and hitch extension I was looking at. I am not sure but I would think that the extension would need some sort of support at the rear seat platform.

pansser · 02-18-2010, 04:47 PM

that hitch mounts to the rear frame in frt of the rear deck. the extension shouldn't need any support.

78Southwind · 02-18-2010, 04:54 PM

Quote:

Originally Posted by pansser

that hitch mounts to the rear frame in frt of the rear deck. the extension shouldn't need any support.

Thanks..

78Southwind · 02-18-2010, 05:06 PM

I am also concerned about the motor getting wet from launching the Sea Doo. Can these motors be submerged into water? If not how about just getting a little wet? Maybe I could get a lift and bigger tires and it will not have to get submerged.

dougmcp · 02-18-2010, 05:17 PM

Quote:

Originally Posted by 78Southwind

I am also concerned about the motor getting wet from launching the Sea Doo. Can these motors be submerged into water? If not how about just getting a little wet? Maybe I could get a lift and bigger tires and it will not have to get submerged.

The motors are not rated waterproof. They are generally located above the rear axle, so as long as the water isn't over all 4 wheel nuts you should be fine.
The offroad/hunting guys regularly get these splashed and even some really wet and haven't heard too many complaints but, long term, I still think it's unwise to get these really wet.

WickedCarts · 02-18-2010, 05:23 PM

we pull my 22 foot boat in and out of the shop everyday with a gas or electric cart.. then we are building a gas cart for a customer that pulls a 2000 pound dragster around the race track

02-18-2010, 04:23 PM	#1
78Southwind Not Yet Wild Join Date: Jan 2010 Location: Chino Hills, CA Posts: 42	Zone Aftermarket Parts and Mods? So who’s going to do what to their Zone once they get them? The first thing I want to do is put a trailer hitch on the Zone. For those in the know, how much will these Car(t)s be able to tow? I just want to be able to tow my GTX Sea Doo and maybe launch it. The Sea Doo is about 500lbs plus the weight of a small trailer.

02-18-2010, 04:24 PM	#2
pansser ZONE FREE ZONE Join Date: Nov 2009 Location: lauderdale by the sea Posts: 571	Re: Zone Aftermarket Parts and Mods?

02-18-2010, 04:26 PM	#3
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: Zone Aftermarket Parts and Mods? It'll pull it. I've pulled mine many times.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

02-18-2010, 04:47 PM	#6
pansser ZONE FREE ZONE Join Date: Nov 2009 Location: lauderdale by the sea Posts: 571	Re: Zone Aftermarket Parts and Mods? that hitch mounts to the rear frame in frt of the rear deck. the extension shouldn't need any support.

02-18-2010, 05:06 PM	#8
78Southwind Not Yet Wild Join Date: Jan 2010 Location: Chino Hills, CA Posts: 42	Re: Zone Aftermarket Parts and Mods? I am also concerned about the motor getting wet from launching the Sea Doo. Can these motors be submerged into water? If not how about just getting a little wet? Maybe I could get a lift and bigger tires and it will not have to get submerged.

02-18-2010, 05:23 PM	#10
WickedCarts NOT a Sponsor Join Date: Jan 2009 Location: So CAL Posts: 2,147	Re: Zone Aftermarket Parts and Mods? we pull my 22 foot boat in and out of the shop everyday with a gas or electric cart.. then we are building a gas cart for a customer that pulls a 2000 pound dragster around the race track

Similar Threads
Thread	Forum
G2/G9 Aftermarket Exhaust	Gas Yamaha
aftermarket clutch	Gas Club Car
aftermarket clutch	Golf Carts and Parts
93 EZ Go Aftermarket Body	Gas EZGO
Aftermarket parts availability across models	Electric Club Car