11-28-2018, 01:30 PM | #1 |
Gone Wild
Join Date: Sep 2018
Location: Michigan
Posts: 291
|
Belt Resources
After installing my VC625 in a 96CC, I think I would like to switch to a shorter belt. I have a couple interference issues on the front side, with a lot of room between the engine and transaxle. Hoping for a resource for belts of varying sizes, preferably double-cogged for extreme performance. I know the belt is 1-3/16" wide, but I'm not certain of its circumference.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-28-2018, 02:38 PM | #2 |
Gone Wild
Join Date: Jul 2018
Location: Central Ohio
Posts: 1,720
|
Re: Belt Resources
Don't know for sure, but I heard this company can do custom belt sizes, and/or match up appropriate belts.
https://www.powermotorsports.com/we-...r-utv--service |
11-28-2018, 02:57 PM | #3 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,639
|
Re: Belt Resources
You can use Dayco.com/parts and look at ATV or snowmobiles and use width and length chart to find your desired size. I found the 1 1/4 belt works fine on the comet 780 clutch. Once you have the dayco part # there are all kinds of places that sell them including E bay where often a deal can be had.For example if your present belt is 44" around the outside and you want to move your engine 2"s forward you need to find a 40" belt. P.S. Don't know length needed for a 625 swap but on my VC 460 powered G 14 I am using the Dayco XTX 2264 which measures 42.83 X 1.25 "'s and is rated for over 100 hp.
|
11-28-2018, 05:58 PM | #4 | |
Crazy Ole Man
Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
Re: Belt Resources
Quote:
|
|
11-28-2018, 06:17 PM | #5 |
Gone Wild
Join Date: Jul 2014
Location: Las Vegas
Posts: 281
|
Re: Belt Resources
You can also use a piece of string to do this! A belt can always come in handy. Let's keep em around. :)
|
11-29-2018, 01:06 AM | #6 |
Crazy Ole Man
Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
Re: Belt Resources
|
11-29-2018, 09:10 AM | #7 |
Gone Wild
Join Date: Sep 2018
Location: Michigan
Posts: 291
|
Re: Belt Resources
I threw my old belt away when I pulled it, I knew I would get a new one with the 625 and the existing belt was past due for replacement. Gonna give the string a shot and see if I can center this engine up a little bit. Hopefully Dayco has something that doesn't cost an arm and a leg.
|
11-29-2018, 09:44 AM | #8 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,639
|
Re: Belt Resources
I have a Dayco HPX 2248 I used as A test belt.It measures 44.72 X 1.26 "'s. It was 2"'s too long for my set up. If it is what you need PM me and I'll give you a half price deal on it.
|
11-29-2018, 10:14 PM | #9 | |
Not Yet Wild
Join Date: Aug 2017
Posts: 27
|
Re: Belt Resources
Quote:
|
|
11-29-2018, 10:37 PM | #10 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,639
|
Re: Belt Resources
I did the Dayco search and found. XTX2244=39.5 X 1.24, XTX2268=39.719 X 1.261 ,XTX2281=37.563 X 1.21, and XTX2282=37.625 X 1.26.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Resources for Columbia ParCar Eagle parts??? | Electric golf carts | |||
Severe Duty Belt or Standard belt ??? | Gas EZGO | |||
replacing alternator/starter belt with shorter belt | Gas Club Car | |||
'92 carryall with new engine, belt slips even with new belt and motor set far forward | Gas Club Car |