CVTech Clutch

shaneomac · 01-28-2010, 09:13 PM

Well, I just recieved my cvtech 6 from ccp, and thought I would post my opinion. It showed up 1/27/10 and wife called me at work and told me it's here. I was like a little kid because it had been on back order for a little while. Today before work I couldn't wait 26 degrees out, but I got her on. All I can say is WOW! What a difference. I had been useing my stock ezgo clutch that had been machined to fit the 1" shaft[no comparison]. This clutch is awsome. Made such a difference. Takking off is very smooth yet solid and percise. Going up hills made a really big difference. The cart didn't slow down near as much and the engine stayed in its rpm range with no slipping of the belt. Now I know I only have a 16 hp vanny but this clutch really [did i say really] takes advantage of all the power the little 16 can make. The only gripe I kinda have is the key way was a little shallow. I had to file my key stock down by about 1/16 to get the clutch to slide on. Really not that big of deal, just a heads up that maybe 1/4 inch keystock might be to thick. All in all CVTech, Tom and Ruredy get 2 thumbs up!

TheNewGuy · 01-29-2010, 07:41 AM

Mine is on the way!

shaneomac · 01-29-2010, 08:32 AM

I thought you already had one?

shaneomac · 01-29-2010, 08:43 AM

oupps, that 2 thumbs up was for roady for the sticky he posted of the clutch options not ruredy. Sorry about that. Thanks guys

scottyb · 01-29-2010, 08:51 AM

Quote:

Originally Posted by shaneomac

oupps, that 2 thumbs up was for roady for the sticky he posted of the clutch options not ruredy. Sorry about that. Thanks guys

Credit, where credit is due

roady89 · 01-29-2010, 10:14 AM

The price is good too! Don't forget...there all kinds of tuning options available. You can take some of the disks out the pucks and make the weights lighter and it will rev higher before engagement.

scottyb · 01-29-2010, 10:16 AM

Looks like I better call Tom .....

shaneomac · 01-29-2010, 10:18 AM

Didn't get to drive it but about 20 min. yeserday. But so far I don't think I'll need to change a thing. It is awsome. baybe after some more testing, but it's only 12 degrees out right now.

scottyb · 01-29-2010, 10:21 AM

Send it out here to Ca. I'll send you back a full report on it..... 65 degrees today

shaneomac · 01-29-2010, 10:26 AM

Man I'm jealous. But you aint gettin it I waited to long for it

01-28-2010, 09:13 PM	#1
shaneomac Gone Wild Join Date: Jun 2009 Location: Central PA Posts: 336	CVTech Clutch Well, I just recieved my cvtech 6 from ccp, and thought I would post my opinion. It showed up 1/27/10 and wife called me at work and told me it's here. I was like a little kid because it had been on back order for a little while. Today before work I couldn't wait 26 degrees out, but I got her on. All I can say is WOW! What a difference. I had been useing my stock ezgo clutch that had been machined to fit the 1" shaft[no comparison]. This clutch is awsome. Made such a difference. Takking off is very smooth yet solid and percise. Going up hills made a really big difference. The cart didn't slow down near as much and the engine stayed in its rpm range with no slipping of the belt. Now I know I only have a 16 hp vanny but this clutch really [did i say really] takes advantage of all the power the little 16 can make. The only gripe I kinda have is the key way was a little shallow. I had to file my key stock down by about 1/16 to get the clutch to slide on. Really not that big of deal, just a heads up that maybe 1/4 inch keystock might be to thick. All in all CVTech, Tom and Ruredy get 2 thumbs up!

01-29-2010, 07:41 AM	#2
TheNewGuy Admin/Moderator Join Date: Dec 2006 Location: Ohio Posts: 18,052	Re: CVTech Clutch Mine is on the way!
	Ron PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project

01-29-2010, 08:32 AM	#3
shaneomac Gone Wild Join Date: Jun 2009 Location: Central PA Posts: 336	Re: CVTech Clutch I thought you already had one?

01-29-2010, 08:43 AM	#4
shaneomac Gone Wild Join Date: Jun 2009 Location: Central PA Posts: 336	Re: CVTech Clutch oupps, that 2 thumbs up was for roady for the sticky he posted of the clutch options not ruredy. Sorry about that. Thanks guys

01-29-2010, 10:14 AM	#6
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: CVTech Clutch The price is good too! Don't forget...there all kinds of tuning options available. You can take some of the disks out the pucks and make the weights lighter and it will rev higher before engagement.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

01-29-2010, 10:16 AM	#7
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,417	Re: CVTech Clutch Looks like I better call Tom .....

01-29-2010, 10:18 AM	#8
shaneomac Gone Wild Join Date: Jun 2009 Location: Central PA Posts: 336	Re: CVTech Clutch Didn't get to drive it but about 20 min. yeserday. But so far I don't think I'll need to change a thing. It is awsome. baybe after some more testing, but it's only 12 degrees out right now.

01-29-2010, 10:21 AM	#9
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,417	Re: CVTech Clutch Send it out here to Ca. I'll send you back a full report on it..... 65 degrees today

01-29-2010, 10:26 AM	#10
shaneomac Gone Wild Join Date: Jun 2009 Location: Central PA Posts: 336	Re: CVTech Clutch Man I'm jealous. But you aint gettin it I waited to long for it