|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
|
11-04-2019, 06:03 PM | #1 |
Not Yet Wild
Join Date: Nov 2014
Posts: 5
|
G14 Engine Swap
Looking for ideas on what to put in my yamaha G14. Vegas carts doesnt make a kit to put the 625 in there. What have you all done as far as swaps. We use the car to push my racecar at the dragstrip. Looking for a power increase over the stock motor with no governor. Thanks
|
11-04-2019, 06:42 PM | #2 |
Getting Wild
Join Date: May 2017
Posts: 87
|
Re: G14 Engine Swap
Vanguard of course.
|
11-04-2019, 07:09 PM | #3 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: G14 Engine Swap
Vegascarts does do one for their DIY VC 460. I have been racing around in mine since 2014
|
11-04-2019, 07:43 PM | #4 |
Not Yet Wild
Join Date: Nov 2014
Posts: 5
|
Re: G14 Engine Swap
I havent got any experience assembling a small motor like that.
|
11-04-2019, 08:08 PM | #5 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: G14 Engine Swap
The other way is buy a honda 390 or some 420 chinese clone and use their install kit. Or can one of your friends involved with your drag car do it ?
|
11-04-2019, 08:15 PM | #6 |
Not Yet Wild
Join Date: Nov 2014
Posts: 5
|
Re: G14 Engine Swap
How detailed are the directions with the DIY kit.
|
11-04-2019, 08:32 PM | #7 |
Gone Wild
Join Date: Jun 2011
Location: Kingston Springs Tn.
Posts: 874
|
Re: G14 Engine Swap
Save yourself some headaches buy the Vegas install kit and a 440 duromax or a 420 predator or Lifan my 2cents
Or a Vanguard if you don’t mind lifting it 4inchs Last edited by BIKERMIKEYBLACK; 11-04-2019 at 08:34 PM.. Reason: Addition |
11-04-2019, 08:33 PM | #8 |
Getting Wild
Join Date: May 2017
Posts: 87
|
Re: G14 Engine Swap
The diy instruction in my opinion are very lacking.so much so I called them when I assembled one.i was asking for ring gap specs,rod bolt torque specs,bearing clearances.i got told its just a lawn mower engine specs aren't that important.however that was a couple years ago and maybe they have improved. Also they still are not very hard to assemble.even if you had questions you could ask on here.
|
11-04-2019, 08:51 PM | #9 |
Not Yet Wild
Join Date: Nov 2014
Posts: 5
|
Re: G14 Engine Swap
The instructions dont look too bad. Ring gap would be ni e to know.
|
11-04-2019, 09:01 PM | #10 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: G14 Engine Swap
I used the Honda GX 390 ring gap specs which is .20-.40 mm or .01-.02 " s. Also used the honda torque specs for bolts not listed by VC. The honda specs are listed all over the net.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
86 club car engine swap. What engine? | Gas Club Car | |||
engine swap | Gas EZGO | |||
Engine Swap help | Big Block Talk! | |||
engine swap | Gas Club Car | |||
Engine Swap | Gas Club Car |