06-04-2020, 11:13 PM | #1 |
Not Yet Wild
Join Date: Jun 2020
Posts: 3
|
Resistance settings of Pot Box
I cannot find serial number but I believe the par car is 1990,s. 36v 3 solenoids. The cart started studering. Measured pot box resistance and it showed inconsistant resistance as I moved it. I replaced the potentiometer with a 0-5kohm. Since the arm on the pot box only moves about a 1/4 turn where should the full throttle resistance be set. I have it set for 3k ohm on full throttle but no movement fwd or rev. I hear the relays working but no movememnt. The pot box is the only thing I changed.
thnks in advance vnt90 |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-19-2020, 02:04 PM | #2 |
How Can I Help?
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 1,383
|
Re: Resistance settings of Pot Box
Should still be close to 5k at full throttle
|
09-14-2020, 07:10 PM | #3 |
Not Yet Wild
Join Date: Sep 2020
Location: Central CA
Posts: 6
|
Re: Resistance settings of Pot Box
if no movement, is your micro switch working?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
reversing pot box resistance | Extreme DC! | |||
V-Glide resistance ? | Electric Club Car | |||
Could filters cause too much resistance? | Gas Club Car | |||
Ignition coil resistance help | Gas Yamaha | |||
solenoid resistance | Electric EZGO |