|
05-19-2020, 03:26 PM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2020
Posts: 1
|
2 solenoid conversion
Well I am working on a par car for a friend, and his ignition switch is out. I have discussed the toggle switch and solenoid method. He agreed and purchased 3 new solenoids. Now for trying to wire them. Any photos or anything will help tremendously. They are 4 post 300a continuous. See photos below. Thanks in advance. Also he bought a 2 wire ignition, and 2 wire toggle. I really need what wires go to where on solenoids, as well as toggle and ignition. I'm hoping someone has done this with the same solenoids and can send photos or a drawing Thanks again,
Jerm20200519_152701.jpg   Sent from my SM-N960U using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-19-2020, 07:00 PM
|
#2 |
|
VC 460 CLONE GONE WILD
 Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,642
|
Re: 2 solenoid conversion
There is sticky above showing how it is done
 |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 48v conversion - no solenoid click | Electric EZGO | |||
| DC-AC conversion solenoid issue. | Electric Yamaha | |||
| G-1 solenoid square to round conversion | Gas Yamaha | |||
| Problems with solenoid on 36v to 48v conversion? | Electric Club Car | |||
| 5 switch/solenoid to V glide conversion | Electric Club Car | |||
Linear Mode
