lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 11-15-2011, 08:50 PM   #1
SEHunter
Gone Wild
 
SEHunter's Avatar
 
Join Date: Sep 2011
Location: Georgia
Posts: 258
Default Lubricate stiff FNR switch contacts?

Ive seen some carts that have a super stiff fnr switch, sometimes to the point of feeling like the lever will break. Mine is ok, just slightly stiff, probably because its new. Anyway, i was wondering if it was a good idea to keep a film of dielectric grease or just an all purpose lubricant on the contacts of the fnr as a part of routine maintainence. Anyone do this?
SEHunter is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 11-15-2011, 10:03 PM   #2
shadowman
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: Lubricate stiff FNR switch contacts?

if i were to use anything it would be the die electric..........................
shadowman is offline   Reply With Quote
Old 11-15-2011, 10:10 PM   #3
simple man
Gone Wild
 
simple man's Avatar
E-Z-GO
 
Join Date: Aug 2011
Location: Bunnell, Florida
Posts: 2,408
Default Re: Lubricate stiff FNR switch contacts?

I used CRC spray silicone on mine. It now moves with 1 finger! The dielectric rating is in kilo volts. It was never so tight that I thought it would break, but it was tight!
simple man is offline   Reply With Quote
Old 11-16-2011, 09:54 AM   #4
TahoeDawgZ71
revolutiongolfcars.com
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
Default Re: Lubricate stiff FNR switch contacts?

WD-40 works great
TahoeDawgZ71 is offline   Reply With Quote
Old 11-16-2011, 07:24 PM   #5
SEHunter
Gone Wild
 
SEHunter's Avatar
 
Join Date: Sep 2011
Location: Georgia
Posts: 258
Default Re: Lubricate stiff FNR switch contacts?

ok good. atleast now i know its done without causing problems. thats my main concern. The way i figure it, if they get so dry and begin to have so much friction, the grinding would prematurely wear off copper contact material. Thanks guys.
SEHunter is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
cleaning contacts on wiper board Electric EZGO
1995 ezgo silanoid/contacts problem Electric EZGO
I believe I shorted contacts on motor Electric EZGO
Hot Contacts Electric EZGO


All times are GMT -5. The time now is 12:41 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.