03-23-2022, 01:31 PM | #11 | |
Getting Wild
Join Date: Jul 2021
Posts: 82
|
Re: 2022 ICON Controller Parameters.
Quote:
|
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-23-2022, 02:59 PM | #12 |
Not Yet Wild
Join Date: Apr 2021
Posts: 2
|
Re: 2022 ICON Controller Parameters.
|
03-23-2022, 06:06 PM | #13 |
Not Yet Wild
Join Date: Apr 2021
Posts: 2
|
Re: 2022 ICON Controller Parameters.
[quote=
|
03-24-2022, 07:03 AM | #14 | |
Getting Wild
Join Date: Jul 2021
Posts: 82
|
Re: 2022 ICON Controller Parameters.
Quote:
|
|
03-24-2022, 08:50 AM | #15 |
Not Yet Wild
Join Date: Dec 2021
Posts: 9
|
Re: 2022 ICON Controller Parameters.
Thanks to all. I feel like an idiot. I was not clicking out of the cell prior to hitting download. the cell lights up red (new input) then hit download
|
03-24-2022, 08:54 AM | #16 |
Not Yet Wild
Join Date: Dec 2021
Posts: 9
|
Re: 2022 ICON Controller Parameters.
played with a little last night. I was able to adjust speedometer to get accurate reading on MPH. Going 22 thinking your going 25 on the dash sucks. now at least we can go 25 mph with accurate readings.
played with rpm and gear ratios, but never got i60L over 26-27 |
03-24-2022, 03:39 PM | #17 | |
Not Yet Wild
Join Date: Mar 2022
Posts: 24
|
Re: 2022 ICON Controller Parameters.
Quote:
|
|
03-24-2022, 03:40 PM | #18 |
Not Yet Wild
Join Date: Mar 2022
Posts: 24
|
Re: 2022 ICON Controller Parameters.
I've got my cable made and got communications established with my controller. I'm going to get started and share my results with you guys.
|
03-24-2022, 08:00 PM | #19 |
Not Yet Wild
Join Date: Mar 2022
Posts: 24
|
Re: 2022 ICON Controller Parameters.
Alright, I spent about an hour exploring controller settings, making some changes, and testing them in real time. I was able to accomplish most of what I wanted to.
Huge thanks to BobInDaytona for figuring out the hardware side. The USB adapter you recommended worked great for me. A few tips to get out of the way first: 1. Download the FTDI drivers for the USB adapter here and install them.I started off in the monitor section. There's a whole bunch of data you can get in real time here, all listed in the "21 Monitor" tab. Anything with a DI suffix means it's a digital input to the controller, for example Fwd DI is the input to the controller from the Forward/Reverse switch. When the switch is in forward, the value of Fwd DI is 1, when the switch is not in forward, the value of Fwd DI is 0. etc. You can also see here that the controller has a digital input for a high/low speed switch which for us is always 0, i.e. our carts are always in high speed mode. 1. I was hoping to find throttle position here and I did, it's called "Throttle AI Votage". I suspected my gas pedal was pegging before it actually reaches the floor and I was right. It's actually pretty severe, the voltage pegs at 4.65v with about 1.5 inches of pedal left. I was hoping this could be fixed in software but I wasn't able to find a way to do it. I might try to fix it in hardware later because it bugs me.I moved over to the tuning screen next. My goals for today were to add some finesse to the gas pedal and turn down the regenerative braking so me and my passengers don't feel like we're on a bull ride. In the "05 Paddle" tab I changed 05.01.03 Throttle Max to 4.65v since I had observed this as the maximum in the monitor tab. This gave me a tiny bit more gas pedal range before it reaches 100% throttle. I tried adjusting 05.01.04 "Throttle Offset" to correct my gas pedal pegging issue but it didn't seem to have any effect, so I set it back to 0.Hope this is helpful. If I mess with it again in the future and find anything interesting I'll let you guys know. |
03-24-2022, 08:40 PM | #20 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: 2022 ICON Controller Parameters.
excellent info jerry.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2022 Icon programming cable | Icon | |||
2022 ICON Motor Controller | Icon | |||
ICON 2022 Software | Icon | |||
New Owner 2022 Icon I40L | Icon | |||
2022 Epic by Icon 40L | Icon |