HD 3B 1977 D Wire's

[SFORCES]

Got the micro switch but when i put the red Wire on the com and the 2 blue wire's crimp together to the nc terminal and switch the toggle switch to on the starter run's but when i push the button in it stops. when i switch the 2 crimp blue wires to no and turn the toggle switch on the starter don't spin till i push the button in. shouldn't they be on the NC terminal that is the way it was with the switch that was on the cart. it didn't have a terminal on NO but the new one does.

[SFORCES]

i put on a new carb and don't remember which cable went to what. what cable goes to the the barrel screw and what goes to the plate with 2 holes in it. and when i install the cable in the carb for throttle is it all the way back to the side of the cart or all the way back to the back of the cart when the pedal isn't pushed down?

[chuckbaynham]

NO - Normally Open means that the switch will not conduct the current with the button in the UP or Not Depressed state.
NC - Normally Closed means the switch will conduct the current when to button is in the UP position and will break the connection when the button is depressed.
Good luck!

[chuckbaynham]

This stuff comes fairly easily to me.
Your skill set likely differs from mine.
Should you still not have success I suggest a short tutorial on the purpose and use of an OHM Meter would likely help.
Nowadays, Youtube is an awesome resource. Google "OHM Meter use" and then select Video. I believe the understanding will follow the learning.
Again, Good luck

[chuckbaynham]

Originally Posted by SFORCES

i put on a new carb and don't remember which cable went to what. what cable goes to the the barrel screw and what goes to the plate with 2 holes in it. and when i install the cable in the carb for throttle is it all the way back to the side of the cart or all the way back to the back of the cart when the pedal isn't pushed down?

https://www.buggiesgonewild.com/atta...7&d=1616625097

[SFORCES]

Originally Posted by chuckbaynham

NO - Normally Open means that the switch will not conduct the current with the button in the UP or Not Depressed state.
NC - Normally Closed means the switch will conduct the current when to button is in the UP position and will break the connection when the button is depressed.
Good luck!

ok so why is it doing the opposite? When i have the 2 blue wire's on the CO tab when i push the button in it will start the starter. when i have them on the NC tap it will start the starter but when i push the button in it will stop

[SFORCES]

ok so what do i need to do to get this going? would like to take it to our camp for the kids to use

[SFORCES]

Guess it will be another year before my kids will get to use the cart