10-14-2022, 06:59 AM | #1 |
Not Yet Wild
Join Date: May 2022
Posts: 3
|
CT&T (czone) CU6 troubleshooting
I am hoping that someone here can help me out. I recently purchased my 1st golf cart and it is a CT&T (czone) CU6. The only issue that it appears to have is that it is extremely slow in forward and reverse even with the accelerator fully engaged.
I have made sure that I am getting 46v from the batteries to the controller, and that there is continuity from the motor to the controller. I can't find any issues with the solenoid or anything else. I ordered a refurb controller that was tested off of ebay as that was the only place I could find one. Replaced the controller with the same issue. I am not sure if the controllers aren't programmed correctly or if there is some other issues. I was able to find what I think are manuals but they are in Korean. I am hoping that someone here can at least maybe point me in the right direction with general troubleshooting so that I can possibly narrow things down. Any help or suggestions would be greatly appreciated. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
DCS troubleshooting | Electric EZGO | |||
Troubleshooting ITS 99 TXT | Electric EZGO | |||
No Go. Troubleshooting help. | Electric Club Car | |||
Troubleshooting | Electric EZGO | |||
troubleshooting | Electric EZGO |