2022 Evolution Programming Tool

[Harvickrulez]

Is there a link or a website that has the software for a 2022 Evolution cart? I bought the cable and need the software now. Thanks in advance.

[Thblur7]

Currently looking for the same thing

[fasteddie1979]

Get it while you can. the English version of the tool.

sendspace.com/file/x9rvy7

sendspace.com/file/k6yphq

[italian_spider]

Originally Posted by fasteddie1979

Get it while you can. the English version of the tool.

sendspace.com/file/x9rvy7

sendspace.com/file/k6yphq

Has anyone been able to confirm that this software will work with the evo cable on ebay to successfully program a 2022 or 2023 Evo controller?

Just asking before potentially wasting $150 on the cable.

Thanks in advance

[KRAZYMATT]

Works fine with the cable I make (CartCables)

[K_2]

Sir, I would like to purchase a cable. I have a 2023 PDG from Tractor Supply. I believe it has the Evo controller discussed here and I would like to increase speed.

Need a few posts to PM ;)

[K_2]

Originally Posted by KRAZYMATT

Works fine with the cable I make (CartCables)

cartcables DOT com you sir?

[jrock52766]

Originally Posted by italian_spider

Has anyone been able to confirm that this software will work with the evo cable on ebay to successfully program a 2022 or 2023 Evo controller?

Just asking before potentially wasting $150 on the cable.

Thanks in advance

Works for me. I just used it for the first time tonight. Cable comes with instructions on how to connect. However, making actual changes is a little daunting.

I bought the Cartcable.

[evoster]

Originally Posted by italian_spider

Has anyone been able to confirm that this software will work with the evo cable on ebay to successfully program a 2022 or 2023 Evo controller?

Just asking before potentially wasting $150 on the cable.

Thanks in advance

it works and it's not very difficult to understand the software parameters and what to change

[KC-EV]

Originally Posted by evoster

it works and it's not very difficult to understand the software parameters and what to change

I have the cable and have adjusted the "P-Maximum forward speed(rpm)", but not much else. What other parameters would you suggest to pick up a bit more umph (ie acceleration, etc)?