|
02-05-2020, 07:18 PM
|
#1 |
|
Runs with scissors-
 Join Date: Dec 2010
Location: Da UP
Posts: 1,962
|
Belt size
Could use some expertise here . Have EZGO TXT & HF670, with Vegas Carts cradle & Mount. Measuring the clutches plus 2 inch results in about 48 1/2 outside dim. Calls and emails to Vegas Carts, still no one could tell me the OD of the belts. I presumed the EZB01/47 was about 47” outside circumference. ( it is)
The belt I asked for is P/N EZBO2V, as it is the one sent with the EZGO/670HF install kit, I was told. I received, EZBO1/47. Call/email to VC again, and was informed the EZBO1/47 IS the belt sent with EZGO/VTwin kit, and the part number EZBO2V is no longer valid. That was about 6 weeks ago. Today I see that part still listed on the website. So, the 1/47 works - kinda. Shifting is difficult, and there is zero movement left in the mount. (The slots are generous, but right now in the wrong direction!) Don’t relish the idea of another $50 belt, but would rather that then to pull the engine to lengthen the slots. Any ideas are appreciated!  |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-05-2020, 07:32 PM
|
#2 |
|
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: Belt size
I used the dayco belt sizing chart for snowmobiles/atv's to find the exact belt needed for a perfect fit along with a much beefier cross section.
|
|
|
|
02-05-2020, 09:26 PM
|
#3 |
|
Runs with scissors-
Join Date: Dec 2010
Location: Da UP
Posts: 1,962
|
Re: Belt size
Thanks Ray - that’s what I was looking for. I had found a Gates chart, but it didn’t quite get there
 |
|
|
|
|
02-05-2020, 10:19 PM
|
#4 |
|
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: Belt size
FYI The 1.25" wide belt works great with the comet 780 and yamaha secondary. It actually gives you a little more top speed as it rides a little higher on the primary.
|
|
|
|
|
02-06-2020, 04:38 PM
|
#5 |
|
Runs with scissors-
Join Date: Dec 2010
Location: Da UP
Posts: 1,962
|
Re: Belt size
Update:
Been working with Geoff at Vegas Carts, and he cleared the part number confusion for me. Two part numbers ( one older, one newer) same part. He also spent some time& several emails to find out why I might need a longer belt. Sure be nice if more businesses were that attentive. X 2 for the Vegas Carts folks. |
|
|
|
|
02-08-2020, 10:05 PM
|
#6 | |
|
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: Belt size
Quote:
One on order..... |
|
|
|
|
|
08-18-2021, 03:31 PM
|
#7 | |
|
Gone Wild
Join Date: Mar 2018
Location: South FL
Posts: 243
|
Re: Belt size
Quote:
|
|
|
|
|
 |
| Tags |
| 670predator, drive belt?, ezgo |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Belt size help | Big Block Talk! | |||
| 1997 ezgo belt size/smaller belt for more torque | Gas EZGO | |||
| 2000 EZ-GO Workhorse - tire size? Belt size? | Gas EZGO | |||
| Belt Size Help !! | Big Block Talk! | |||
| Belt size | Gas Yamaha | |||
Linear Mode
