lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Icon


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-06-2022, 09:40 PM   #11
Stroked250
Not Yet Wild
 
Join Date: May 2022
Posts: 45
Default Re: 2022 Icon i40FL programming ? - Motor shows 6600RPM MAX

Quote:
Originally Posted by derelicte View Post
I wonder what would happen if you loaded a config with a 7200 rpm limit on the controller...

My assumption is that it would revert back to 6000. Shouldn't matter if you hand type that value in the parameter to load it. The value check happens when you try to save the setting. The firmware is holding the max values for the field. I would need to flash the controller back to an earlier firmware first.
!
Stroked250 is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Icon


Thread Tools
Display Modes


Similar Threads
Thread Forum
2022 Icon programming cable Icon
2022 Icon Programming Cable Icon
2022 Icon Programming Software Icon
2022 Icon Programming Issues Icon


All times are GMT -5. The time now is 08:54 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.