LED Kit for Clubcar DS with Factory Lights

[kgsc]

Originally Posted by rowlands57

One more question if I may, what voltage are you running to the LED's. I'm new to the DS and still learning. I believe I have a factory set of lights that currently have a 9004 standard headlight bulb. I want to be sure the power that is running to that setup is sufficient for these LED's.

Thank you.

If you are asking about current the led version of a 9004 pulls much less current than the standard bulb. I replaced the bulbs on an rxv with 886 and 1157 bulbs and the current draw went from 7 amps to around an amp. Muy bueno.

[rowlands57]

Thanks folks. I'll check which setup I have to power the lights, a reducer or a connection across 2 batteries. I'm going to go with the LED's in this post for sure as I like the idea of drawing less current when they're on.

[Mikewheelz89]

The new LED lights will make a big difference. I picked some up last year and as Goober mentioned I would also recommend adding a voltage reducer especially if you are adding another accessory like a light bar.

[CGSteve]

Great topic and timely too! While on Christmas break, my two oldest boys rammed my carryall 2 into a bush and broke the left headlight bezel. I cannot find a factory bezel replacement part number...anyone have a number?

[DaveMJ]

Originally Posted by CGSteve

Great topic and timely too! While on Christmas break, my two oldest boys rammed my carryall 2 into a bush and broke the left headlight bezel. I cannot find a factory bezel replacement part number...anyone have a number?

1016880 I believe is what you are looking for assuming you have a 93 or newer DS.

[CGSteve]

Originally Posted by djohns18

1016880 I believe is what you are looking for assuming you have a 93 or newer DS.

BINGO!!!

Thanks, I checked a number of places online and could not find what I was looking for. Evidently my google-** is weak...

Thanks again!

[Out2Sea]

Originally Posted by CGSteve

BINGO!!!

Thanks, I checked a number of places online and could not find what I was looking for. Evidently my google-** is weak...

Thanks again!

I doubt you will find that part. It really isn’t meant to be replaced. Your easiest solution is LED 4x6 headlights. A little under $40.

[DaveMJ]

Originally Posted by Out2Sea

I doubt you will find that part. It really isn’t meant to be replaced. Your easiest solution is LED 4x6 headlights. A little under $40.

He's looking for the bezel, they are readily available.

[Goober11]

Ebay an Amazon have them.

https://www.amazon.com/XtremeAmazing.../dp/B07X239J5K

[hrk]

Originally Posted by djohns18

I've installed these on several carts, I think they are very effective. I install with an additional switch to allow High Beam to be switched on and off as required.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Note - there are two different cowls for the DS and the cowl determines which headlights can be installed. Please see linked "sticky".

https://www.buggiesgonewild.com/showthread.php?t=129655

This is the route I"m thinking of taking,

Djohns18, do you have any instructions, what work is involved, tools, cutting etc

Also want to replace the rear lights with LEDs, so suggestions for those would be great.

Thanks