09-11-2009, 01:56 PM | #1 |
Not Yet Wild
Join Date: Aug 2009
Posts: 8
|
Controller input
My question is what is the throttle input for a 2001 Club Car DS 48 volts? I have to replace a bad controller and I noticed the controller input listed for club cars is either 0-5k ohms or 5k-0 ohm. I am under the impression that my club car takes a 5k-0 ohms input on the controller. Thanks for any help.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-11-2009, 05:43 PM | #2 |
Gone Wild
Join Date: Sep 2008
Posts: 192
|
Re: Controller input
hook up an Ohm meter to the wires coming from your throttle and you can find out. If it is at 0k at rest and goes to 5k when the trottle is pressed and vice versa you will know your answer. But if it is all still factory i am 90% sure you have a 0-5k setup
|
09-11-2009, 06:11 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Controller input
Ezgo and Yamaha ran 0-5k . CC was the odball running 5K-0 ohms.... These are the readings you will get from the potentiometer..... The later model MCOR is a different animal .... It sends its throttle position signal in volts. You will need to know which throttle indicator you have when you order....
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Input shaft | Electric EZGO | |||
Hello and Trans input shaft ???? | Gas Yamaha | |||
need input shaft for G2 | Golf Carts and Parts | |||
94 medalist input shaft | Electric EZGO | |||
Starting input needed | Gas EZGO |