|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
02-12-2017, 05:30 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2016
Location: Frisco, TX
Posts: 12
|
Wiring a 36v - 12v reducer EZGO PDS
I recently bought a 2001 PDS and have been restoring it. I'm wiring the power reducer and have everything done except the key on power wire. Can someone tell me which wire I should splice into close to the controller that would power on the reducer when I turn the key to the on position?
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-12-2017, 08:21 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Wiring a 36v - 12v reducer EZGO PDS
Power from the key goes to the pedal box micro switch... sorry there is no connection near the controller that does not go on/off with the go pedal - which of course would not be good for accessory power.
|
|
|
|
|
02-12-2017, 08:51 PM
|
#3 |
|
Not Yet Wild
Join Date: Dec 2016
Location: Frisco, TX
Posts: 12
|
Re: Wiring a 36v - 12v reducer EZGO PDS
Thanks Scottyb! Can I run the wire to the micro-switch? Or would it be better to run it up to the key cylinder?
|
|
|
|
|
02-13-2017, 02:01 PM
|
#4 |
|
Gone Wild
Join Date: Aug 2014
Location: Duncan Corners
Posts: 905
|
Re: Wiring a 36v - 12v reducer EZGO PDS
Better to run to keyswitch.
That places it in a (relatively) easy to reach and logical place. |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| EZGO RXV Voltage Reducer Wiring (solenoid?) | Electric EZGO | |||
| 36v TXT voltage reducer wiring help | Electric EZGO | |||
| Reducer wiring problems | Electric Club Car | |||
| Reducer wiring help | Electric EZGO | |||
| Wiring Reducer | Electric EZGO | |||
Linear Mode
