lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-20-2012, 10:05 PM   #1
rockey
Not Yet Wild
 
Join Date: Nov 2012
Posts: 14
Default Thread lock on bolt or not?

Folks excuse my ignorance but I don't know what it's called but there are 2 hex bolts right behind the front wheel spindle, well one of these bolts came out for me today, my question is do I put some type of lock washer or thread lock when reinstalling this bolt?
Thanks
rockey is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
can't get clutch off (IS BOLT LEFT HAND THREAD)??? Gas Club Car
Need Help with Bolt Size and Thread Gas EZGO
What size thread for Primary Puller Bolt? Gas Yamaha
Clutch Bolt Thread Specs Gas Yamaha
96 DS stock drive clutch bolt size (exterior bolt) Gas Club Car


All times are GMT -5. The time now is 12:31 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.