1990 (ish) Ez-Go rear end spline?

Timothy L · 03-12-2023, 02:11 PM

The chain tensioner has been working great so far. Took it on about a 3.5 mile ride for the first time and the chain tensioner did it’s job perfectly. Also I got to 33mph which was unexpected fun [emoji2956]

BestAsbestos · 03-13-2023, 06:33 PM

Quote:

Originally Posted by dundeebarnbuggy

This has been tried numerous times with little success.

Yeah well, those people weren't me.

dundeebarnbuggy · 03-13-2023, 08:17 PM

Quote:

Originally Posted by BestAsbestos

Yeah well, those people weren't me.

More power to you, especially if you get it right!!!

I'm following this one, and can't wait to see how you guys fit a gearbox in there!

BestAsbestos · 03-14-2023, 05:28 PM

Quote:

Originally Posted by dundeebarnbuggy

More power to you, especially if you get it right!!!

I'm following this one, and can't wait to see how you guys fit a gearbox in there!

Mines right in the middle of my first picture behind the diff. It was kinda hard to make it fit, had to drill extra holes on the torque converter plate and squeeze it in.

dundeebarnbuggy · 03-14-2023, 08:07 PM

Now I see it. KOOL!

Sorry, I am not too familiar with these go cart components. Do keep us posted on the chain life as you use the cart as one would imagine that chain must be running at a hell of a speed.

BestAsbestos · 03-23-2023, 07:27 PM

Anyone know what the thread size is for this? At least it appears to be threaded.

dundeebarnbuggy · 03-23-2023, 07:47 PM

Doesn't appear threaded from here. Probably ust counterbored to facilitate holding it in a mill when the splines were cut. If the shaft was only case hardened, it will be easy to drill and tap for whatever size bolt you need.

03-12-2023, 02:11 PM	#11
Timothy L Not Yet Wild Join Date: Nov 2018 Posts: 25	Re: 1990 (ish) Ez-Go rear end spline? The chain tensioner has been working great so far. Took it on about a 3.5 mile ride for the first time and the chain tensioner did it’s job perfectly. Also I got to 33mph which was unexpected fun [emoji2956]
Timothy L Not Yet Wild Join Date: Nov 2018 Posts: 25

03-14-2023, 08:07 PM	#15
dundeebarnbuggy Gone Wild Join Date: Oct 2016 Location: Dundee quebec Posts: 3,190	Re: 1990 (ish) Ez-Go rear end spline? Now I see it. KOOL! Sorry, I am not too familiar with these go cart components. Do keep us posted on the chain life as you use the cart as one would imagine that chain must be running at a hell of a speed.

03-23-2023, 07:27 PM	#16
BestAsbestos Not Yet Wild Join Date: Feb 2021 Posts: 14	Re: 1990 (ish) Ez-Go rear end spline? Anyone know what the thread size is for this? At least it appears to be threaded.
BestAsbestos Not Yet Wild Join Date: Feb 2021 Posts: 14

03-23-2023, 07:47 PM	#17
dundeebarnbuggy Gone Wild Join Date: Oct 2016 Location: Dundee quebec Posts: 3,190	Re: 1990 (ish) Ez-Go rear end spline? Doesn't appear threaded from here. Probably ust counterbored to facilitate holding it in a mill when the splines were cut. If the shaft was only case hardened, it will be easy to drill and tap for whatever size bolt you need.

Similar Threads
Thread	Forum
anyone put a 10 spline spicer rear to 19 spline amd motor	Electric EZGO
1985 36v 10 spline motor options or 19 spline conversion	Electric EZGO
1990 EZGO electric--19 spline?	Electric EZGO
Ezgo rear hub disc / drum spline help	On Road Golf Carts!
ISO ezgo 19 spline rear end	Golf Carts and Parts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum