Drive Clutch Disassembly

[chiphilton@protonmail.com]

Hi friends,

I've got a drive clutch from an old Cushman Golfster. Finally got it off of the shaft and want to try and get it apart to see if it is worth saving. It didn't move the two v-shaped pulleys together to spin the transmission pulley. I was able to get out the center spacer but the other end has no visible connection. Attaching pics to see if anybody has more knowledge than me.

Thanks in advance for any and all assistance.

[Lochlin]

I don't know that specific cart but, to me, the part with the keyway in it, looks pressed in to me. All the same, there has to be a

Attached is what should be a parts manual for that cart. On page 14 is the clutch diagram. It clearly shows some free standing parts there. A wheel puller will likely get that middle piece out. Tapping it might work as well.

[chiphilton@protonmail.com]

Thanks for the advice. It does say "use a plastic hammer" on the one end. I'll give this a shot. Thanks for the manual link as well.