cheap plasma cutter

raydhd · 09-23-2016, 10:38 PM

Did more cutting today on my harley golf cart swapping in 440 FC snowmobile engine. The more I use my Cut 50 the happier I am that with the purchase.It sure makes cutting thicker metal a snap.

smokindawg · 09-25-2016, 10:02 PM

Yep and it doesn't matter what metal either....... Cut's aluminum like butter with a hot knife.

The plasma cutter is one of my favorite tools.

cart around · 02-13-2020, 02:32 PM

Time to revive this old thread.
My Cut50 was delivered on Monday. Up to $230 now. I plumbed , and wired it, then zipped through a piece of 1/16" as fast as I could move my hand. Very pleased with it so far.

In fact, I'm thrilled that it actually turned on, and worked. I left the garage door open for the Amazon driver. He delivered to a nice dry garage like he was supposed to. I have a Redbone/Shepard mix that thinks all deliveries are his. He ripped it open, and dragged it around the yard by the cord while it was pouring down rain.
When I got up after 4, I drained the water out of it, and managed to find all of the bagged parts. It now has a big 240 plug with a six inch cord sticking out of it.

I knew there was no way that I could return it, so I'm definitely thrilled that it still works. I just ordered a 50 pack of consumables, and a roller wheel to keep the tip up.

raydhd · 02-13-2020, 06:27 PM

Yeah I got the big pack of consumables also and the roller tip that I have yet to test. You will have to get the dog a helmet too.

raydhd · 02-13-2020, 11:29 PM

For some real fun cut some stainless. Can't believe how easy it cuts compared to other methods.

cart around · 02-14-2020, 07:20 AM

If the dog had thumbs, he could hold the cheap Chinese helmet that came with it.

raydhd · 02-14-2020, 08:53 AM

That was my laugh for the morning.

raydhd · 04-24-2021, 10:04 AM

My hose blew out yesterday on my Cut 50 just below the nozzle inside the handle itself. That left a scorched area inside there. I orders a whole new torch and hose. For the $50 I hope this works our rather getting a whole new machine ?

raydhd · 04-30-2021, 01:53 PM

The E Bay replacement hose and torch arrived today. Works perfectly and is of much better quality than the original

raydhd · 02-04-2022, 10:41 AM

I see Emilia Hartford got a HF Titan plasma cutter for her BIG block new mustang engine swap. The girl loves her tools and toys.

09-23-2016, 10:38 PM	#41
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,035	Re: cheap plasma cutter Did more cutting today on my harley golf cart swapping in 440 FC snowmobile engine. The more I use my Cut 50 the happier I am that with the purchase.It sure makes cutting thicker metal a snap.

09-25-2016, 10:02 PM	#42
smokindawg Gone Wild Join Date: Sep 2012 Location: Missouri Posts: 2,755	Re: cheap plasma cutter Yep and it doesn't matter what metal either....... Cut's aluminum like butter with a hot knife. The plasma cutter is one of my favorite tools.

02-13-2020, 02:32 PM	#43
cart around Test before replacing Join Date: Aug 2013 Location: Ohio side of the Pennsylvania border. Posts: 3,354	Re: cheap plasma cutter Time to revive this old thread. My Cut50 was delivered on Monday. Up to $230 now. I plumbed , and wired it, then zipped through a piece of 1/16" as fast as I could move my hand. Very pleased with it so far. In fact, I'm thrilled that it actually turned on, and worked. I left the garage door open for the Amazon driver. He delivered to a nice dry garage like he was supposed to. I have a Redbone/Shepard mix that thinks all deliveries are his. He ripped it open, and dragged it around the yard by the cord while it was pouring down rain. When I got up after 4, I drained the water out of it, and managed to find all of the bagged parts. It now has a big 240 plug with a six inch cord sticking out of it. I knew there was no way that I could return it, so I'm definitely thrilled that it still works. I just ordered a 50 pack of consumables, and a roller wheel to keep the tip up.

02-13-2020, 06:27 PM	#44
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,035	Re: cheap plasma cutter Yeah I got the big pack of consumables also and the roller tip that I have yet to test. You will have to get the dog a helmet too.

02-13-2020, 11:29 PM	#45
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,035	Re: cheap plasma cutter For some real fun cut some stainless. Can't believe how easy it cuts compared to other methods.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-14-2020, 07:20 AM	#46
cart around Test before replacing Join Date: Aug 2013 Location: Ohio side of the Pennsylvania border. Posts: 3,354	Re: cheap plasma cutter If the dog had thumbs, he could hold the cheap Chinese helmet that came with it.

02-14-2020, 08:53 AM	#47
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,035	Re: cheap plasma cutter That was my laugh for the morning.

04-24-2021, 10:04 AM	#48
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,035	Re: cheap plasma cutter My hose blew out yesterday on my Cut 50 just below the nozzle inside the handle itself. That left a scorched area inside there. I orders a whole new torch and hose. For the $50 I hope this works our rather getting a whole new machine ?

04-30-2021, 01:53 PM	#49
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,035	Re: cheap plasma cutter The E Bay replacement hose and torch arrived today. Works perfectly and is of much better quality than the original

02-04-2022, 10:41 AM	#50
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,035	Re: cheap plasma cutter I see Emilia Hartford got a HF Titan plasma cutter for her BIG block new mustang engine swap. The girl loves her tools and toys.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
00.5 DS w/Plasma Color Shift	Members Rides
tig wleder - plasma	Design Center
Looking for a plasma cutter	Design Center
Drill, cutter lube	Design Center
Tubing Notcher VS Plasma Cutter?	Design Center