Programming Curtis Controller

[Aleksandr789]

Originally Posted by woodygb

See if this works.

Try ...OPTIONS - SECURITY - Enable Advanced Cloning By Default

woodygb, thanks for the answer

this does not work ((

[woodygb]

Not really sure how to help.

Check that your registry entry is correct for both SAL and IAL.

[Aleksandr789]

woodygb, Thank you !
works!
factory level, was not enough.

[Aleksandr789]

since 2015, 1314-PCPS software update not visible.

curtis is not working on PCPS?

[TheCartBoy]

Their datasheet is from 2019. doesn't look like its being updated anymore.

https://www.curtisinstruments.com/products/programming

[scb71]

2021 72V Ezgo express L6

I’ve read through this extremely helpful but quite lengthy and varied thread and have some questions please.

My cart is simply too slow. It maxes out uphill and downhill at 17mph which is clearly programmed.

I think I should buy the interface which will allow computer programming as that appears to be the most detailed and likely to work.

Do the EBay 1314-4402 clones work?
Can someone send a current link to the software?

Many many thanks!

[TheCartBoy]

Yes that's the right cable, when you look at the label you want it to say OEM.
The software link is buried somewhere in this thread, along with those IAL details.

[scb71]

Thanks- so does it have to be an actual OEM cable or do the Chinese clones work? I’d surely prefer to not spend $500 on a cable I may never need again.

If it does require an actual one that sounds like a great rental opportunity if anyone has one!

[augiedoggy]

Originally Posted by scb71

Thanks- so does it have to be an actual OEM cable or do the Chinese clones work? I’d surely prefer to not spend $500 on a cable I may never need again.

If it does require an actual one that sounds like a great rental opportunity if anyone has one!

I bought the components to make my cable for like $20... I have a 1205m clone though.. https://buggiesgonewild.com/showthread.php?t=188959

[kgsc]

Originally Posted by scb71

Thanks- so does it have to be an actual OEM cable or do the Chinese clones work? I’d surely prefer to not spend $500 on a cable I may never need again.

If it does require an actual one that sounds like a great rental opportunity if anyone has one!

Start on page 120. Couple of text files you can use to load the cable. You will need an ATX cable extension for the end, the software you can download from the links in the posts and the cable shown on page 125 TTL-232R-3V3-WE Pics attached Once connected you will need to go add some entries in your registry to get OEM.