Trying to Re-Connect the key Switch on '87 cart.

[mjrowley]

I picked up a '87(was told it was a 91 or 92) Club Car.

Switch is not hooked up, so im trying to get it hooked up.

I have printed the wiring diagram for my year model but noticed that the wire colors are not labeled on the diagram.

Besides i'll admit im a bit confused with all the wire in there.

Here are my pics:



Above pic is the wiring bundle coming from the front of the cart to the engine compartment. I removed a fuse that had the Green and Black wires connected. No idea why that fuse was there.







Thanks for your help!

[scottyb]

I have an 85 chassis in the yard, so I might be able to help..... they should be close to the same.... mine has the engine removed.
First establish where the power is or should be coming up to the ignition switch ... this should be a fused pos feed. The feed wire looks to be red and fused....What was that the fuse you removed on the green striped wire? Careful removing stuff you do not know exactly what it is or does. There is very little in these carts which is not necessary ....

[mjrowley]

Originally Posted by scottyb

I have an 86 chassis in the yard, so I might be able to help..... they should be the same.... mine has the engine removed.
First establish where the power is or should be coming up to the ignition switch . this should be a fused pos feed. Was that the fuse you removed on the green striped wire?

Yes it was on the green striped wire, and it was blown.

[scottyb]

I added to my original post
Best find out where the wire went and why the fuse blew? THat may be a good starting point.... can you find that wire in the dash?

[mjrowley]

Originally Posted by scottyb

I added to my original post
Best find out where the wire went and why the fuse blew? THat may be a good starting point.... can you find that wire in the dash?

I am pen to phone calls, my cell # is 602 558 1160, on the Verizon/ Altell network.

Ill reinstall the fuse and take a pic.

BRB!

[scottyb]

I'm sorry I don't have a minute plan which allows me to fix carts over the phone Do you have a 12v test light and some basic trouble shooting experience? If not you may be best off taking this to a shop for an hour of their time?

[mjrowley]

Originally Posted by scottyb

I'm sorry I don't have a minute plan which allows me to fix carts over the phone Do you have a 12v test light and some basic trouble shooting experience? If not you may be best off taking this to a shop for an hour of their time?

[mjrowley]

Also I can do testing i just need to know where to start...

[scottyb]

Originally Posted by scottyb

I have an 85 chassis in the yard, so I might be able to help..... they should be close to the same.... mine has the engine removed.
First establish where the power is or should be coming up to the ignition switch ... this should be a fused pos feed. looks to be red and fused....What was that the fuse you removed on the green striped wire? Careful removing stuff you do not know exactly what it is or does. There is very lThe feed wireittle in these carts which is not necessary ....

I would start with finding the ignition switch feed? Then I would test the switch ..... then trace out the switch leads... That is how I would do it.

[mjrowley]

Originally Posted by scottyb

I would start with finding the ignition switch feed? Then I would test the switch ..... then trace out the switch leads... That is how I would do it.

OPPS! looks like i need to redo reading comprehension from school.