lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 07-04-2009, 07:59 PM   #11
tonyton
Gone Wild
 
tonyton's Avatar
E-Z-GO
 
Join Date: Jan 2009
Location: Alabama
Posts: 2,120
Default Re: HEI ignition module conversion

Quote:
Originally Posted by ruredy View Post
Look in this thread, scroll down to the end
http://www.buggiesgonewild.com/ezgo-...iagram-id.html
The wiring diagram is a click away!
tonyton is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 07-04-2009, 08:50 PM   #12
jeffro2000
Not Yet Wild
 
Join Date: Jun 2009
Posts: 2
Default Re: HEI ignition module conversion

Thanks for the diagram, but that is with the stock coil I am guessing. The GM coil has four prongs for a harness to clip into if used with a distributor, so I was wondering if it mattered where I put the 2 cart wires. Thanks Jeff
jeffro2000 is offline   Reply With Quote
Old 07-04-2009, 10:22 PM   #13
shawn.m
Gone Wild
 
shawn.m's Avatar
 
Join Date: Aug 2007
Location: near sacramento,ca
Posts: 1,893
Default Re: HEI ignition module conversion

gm has 4 prongs 2 are for distributor and 2 for tach. cant remember which off the top of my head. would have to go home and get my gm book
shawn.m is offline   Reply With Quote
Old 10-19-2009, 04:38 AM   #14
scoobydoo
Not Yet Wild
 
Join Date: Oct 2009
Posts: 3
Default Re: HEI ignition module conversion

Quote:
Originally Posted by turkey lurkey View Post
I've performed this conversion as listed in Gas tech section, but now need to change out the accompanying ignition coil. Can anyone tell me exactly which ignition coil to replace with? My auto parts store is slightly less clueless than I on this subject. If I buy a round universal type coil, is it oil-filled and has to be mounted vertically instead of the existing Ezgo that mounts horizontally? Thanks
What conversion did you perform, and how did the coil swap over go? Can you provide details, if not too much of a bother?
scoobydoo is offline   Reply With Quote
Old 10-19-2009, 04:39 AM   #15
scoobydoo
Not Yet Wild
 
Join Date: Oct 2009
Posts: 3
Default Re: HEI ignition module conversion

Quote:
Originally Posted by scoobydoo View Post
What conversion did you perform, and how did the coil swap over go? Can you provide details, if not too much of a bother?
Sorry! How did the coil swap go over?!
scoobydoo is offline   Reply With Quote
Old 10-19-2009, 08:16 AM   #16
turkey lurkey
Not Yet Wild
 
turkey lurkey's Avatar
E-Z-GO
 
Join Date: Mar 2009
Location: Fenton, Missouri
Posts: 43
Default Re: HEI ignition module conversion

Look at the sticky on this forum and it will show you the wiring diagram, which HEI module to by, etc. I then used a standard chrome looking conventional coil, mounted it near the igitor module on the frame with a mount sold at O'reilly's. It worked fantastic, deep blue spark, and much cheaper than the OEM. Sorry I've since sold the cart and can't give you name or part #'s.
turkey lurkey is offline   Reply With Quote
Old 04-22-2010, 11:56 PM   #17
pikuni
Not Yet Wild
 
Join Date: Apr 2010
Posts: 6
Default Re: HEI ignition module conversion

which connectors did you connect to on the coil there are 4 connections on the chevy coil so I am not sure which ones to connect the orange and green wires to
pikuni is offline   Reply With Quote
Old 04-24-2010, 07:24 AM   #18
ruredy
Born Wild
 
ruredy's Avatar
 
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
Default Re: HEI ignition module conversion

Quote:
Originally Posted by ruredy View Post
Look in this thread, scroll down to the end
http://www.buggiesgonewild.com/ezgo-...iagram-id.html
ruredy is offline   Reply With Quote
Old 04-26-2010, 09:30 AM   #19
pikuni
Not Yet Wild
 
Join Date: Apr 2010
Posts: 6
Default Re: HEI ignition module conversion

I know where the thread is with the diagram but it does not say which of the 4 connections to connect to, it shows a stock coil that only has 2 connections. I also can't figure where the orange wire hooks up on the module as the black wire hooks up to C but it also looks like the black wire does too,
pikuni is offline   Reply With Quote
Old 05-03-2010, 09:55 AM   #20
tguellich
Gone Wild
 
tguellich's Avatar
E-Z-GO
 
Join Date: Apr 2010
Location: Born and raised in the state of Confusion
Posts: 150
Default Re: HEI ignition module conversion

I did the conversion this weekend and it was at least 4-5 times improvement in performance. I used a 4 wire HEI module and an old oil filled cylindrical coil. someone asked if they needed a resistor in line. Do I? It seems to be running fine but I don't want to fry anything?
tguellich is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Ignition Electric Club Car
keyed ignition Gas Club Car
Need Battery and ignition Gas EZGO
Module settings Electric Club Car


All times are GMT -5. The time now is 09:12 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.