lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO > Ezgo Gas Tech
Ezgo Gas Tech Resource info, wiring diagrams and how to's for Gas powered EZGO golf carts



 
 
Thread Tools Display Modes
Old 06-11-2007, 06:49 AM   #1
mb523
Peanut
 
mb523's Avatar
E-Z-GO
 
Join Date: Feb 2007
Location: Western Massachusetts
Posts: 656
Lightbulb Removing an EZGO clutch

Hey yall, finally got my clutch puller and my new (used) clutch from Matt. I figured I would post some pics of the pulling and install, maybe it will help someone if they ever need to do it!

I packed the hole with grease before putting the puller in. It creates pneumatic pressure helping coax the clutch off the shaft.
Ezgo clutch removal

Tightened it down and had someone hold the clutch. A few sharp cracks on the end of the ratchet and I was holding it in my hand!
ezgo clutch

Old one off, new one ready to go back on!
ezgo clutch install

Just put the new one on the taper and tightened down the bolt. DONE!
1 pg clutch

Easy as that!
1pg clutch
mb523 is offline  
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 06-11-2007, 07:16 AM   #2
mphillip
Site Moderator
 
mphillip's Avatar
E-Z-GO
 
Join Date: Dec 2006
Location: Tennessee
Posts: 2,008
Default Re: Removing an EZGO clutch

Great Post.... Love the pictures to go along with the info....
mphillip is offline  
Old 06-16-2007, 01:39 PM   #3
2stroke
Gone Wild
 
Join Date: Jan 2007
Posts: 382
Default Re: Removing an EZGO clutch

matts looks worse than your original
2stroke is offline  
Old 06-16-2007, 11:36 PM   #4
mb523
Peanut
 
mb523's Avatar
E-Z-GO
 
Join Date: Feb 2007
Location: Western Massachusetts
Posts: 656
Default Re: Removing an EZGO clutch

Quote:
Originally Posted by 2stroke View Post
matts looks worse than your original
Yea, just the outside though. The stationary sheave is steel on the newer one (thus the rust) and my old one was all aluminum. The innards of Matts is a lot cleaner and less worn than mine, which is all that matters. Best of all, it is quieter. My little sister comes out of the house when I am drivin the cart around and says "Hey, it doesn't sound like a golf cart anymore!" I just laughed and said that it sounds like a NORMAL golf car now... LOL

Thanks for the complement mphillip! I try to help others best I can when it comes to these older carts. I know from experience how difficult it is to find info and how-to's on them! I used to have instructions on how to change rear differential oil but it got lost in the hack... I should re-post it ey?
mb523 is offline  
Old 06-18-2007, 06:34 AM   #5
TheNewGuy
Admin/Moderator
 
TheNewGuy's Avatar
Yamaha
 
Join Date: Dec 2006
Location: Ohio
Posts: 18,009
Default Re: Removing an EZGO clutch

Yes!!! Re-post it. Your tech posts are very good info Thanks and
keep them coming!!

TheNewGuy is offline  
Old 06-18-2007, 06:50 AM   #6
mb523
Peanut
 
mb523's Avatar
E-Z-GO
 
Join Date: Feb 2007
Location: Western Massachusetts
Posts: 656
Default Re: Removing an EZGO clutch

Quote:
Originally Posted by TheNewGuy View Post
Yes!!! Re-post it. Your tech posts are very good info Thanks and
keep them coming!!
Ron, where should I post it? Here in EZGO? I don't want them to get lost in the mix of other posts...
mb523 is offline  
Old 06-18-2007, 08:52 AM   #7
TheNewGuy
Admin/Moderator
 
TheNewGuy's Avatar
Yamaha
 
Join Date: Dec 2006
Location: Ohio
Posts: 18,009
Default Re: Removing an EZGO clutch

Yes, here will be good. We will keep them at the top.

TheNewGuy is offline  
Old 09-18-2007, 05:00 PM   #8
Diver
Not Yet Wild
 
Diver's Avatar
Yamaha
 
Join Date: Sep 2007
Location: South Carolina
Posts: 48
Default Re: Removing an EZGO clutch

I pulled my ezgo clutch with a 2 inch fine thread 3/4 bolt and about a 5 inch 5/8rod. Put the rod in the clutch hole , screwed in the bolt and popped the clutch off. This cost me 4.50 at the local hardware store, so if in a bind and don't have access to the 30 plus dollar puller , hit the hardware store
Butch
Diver is offline  
Old 09-19-2007, 07:06 AM   #9
mphillip
Site Moderator
 
mphillip's Avatar
E-Z-GO
 
Join Date: Dec 2006
Location: Tennessee
Posts: 2,008
Default Re: Removing an EZGO clutch

Quote:
Originally Posted by Diver View Post
I pulled my ezgo clutch with a 2 inch fine thread 3/4 bolt and about a 5 inch 5/8rod. Put the rod in the clutch hole , screwed in the bolt and popped the clutch off. This cost me 4.50 at the local hardware store, so if in a bind and don't have access to the 30 plus dollar puller , hit the hardware store
Butch
Thanks for the info. I'm sure that it will come in handy.
mphillip is offline  
Old 09-19-2007, 08:37 PM   #10
mb523
Peanut
 
mb523's Avatar
E-Z-GO
 
Join Date: Feb 2007
Location: Western Massachusetts
Posts: 656
Default Re: Removing an EZGO clutch

Always good to have more than one way to do a job! Great info Butch! Thank you!
mb523 is offline  
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO > Ezgo Gas Tech


Thread Tools
Display Modes



All times are GMT -5. The time now is 06:11 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.