05-30-2023, 07:29 PM | #11 |
Not Yet Wild
Join Date: Jun 2020
Posts: 32
|
Re: Tach Not Working on 670 Swap
The big boy 8068 will be delivered tomorrow. Ill keep you posted on case no one responds. I'm sure this may come in helpful to others down the line.
Sent from my SM-G965U using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-30-2023, 07:53 PM | #12 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,593
|
Re: Tach Not Working on 670 Swap
I wire the tach in with the power and the ground and just as a test run the plug sensor wire right to the tach over the seat to make sure everything is functioning before actually routing the sensor wire. It plugs in easily enough. P.S. Wonder why he had an extra sensor unit on hand ? Luckily for us experimenters Equus sells them as a separate replacement part
|
06-01-2023, 08:45 PM | #13 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,313
|
Re: Tach Not Working on 670 Swap
8068 plug wire clamp. I sleeved the plug wire with clear vinyl tubing for a snug fit. The tubing was notched so the inductive pickup could 'see' the plug wire.
|
06-03-2023, 08:02 PM | #14 |
Not Yet Wild
Join Date: Jun 2020
Posts: 32
|
Re: Tach Not Working on 670 Swap
I ended up replacing both coils and the coil diode today, with proper gap. I am pretty sure this was my issue as this buggy has come to life. The 8068 will work both ways on my buggy, the green wire connected directly to the coil diode OR the pickup cable over the spark plug wire as described above.
This coincides with the info on the side of the 8068 box. Here's a photo. Thanks for the help! Sent from my SM-G965U using Tapatalk |
06-03-2023, 08:08 PM | #15 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,593
|
Re: Tach Not Working on 670 Swap
Great it all worked out That is just the tach to use on engine swaps other than diesel
|
09-04-2023, 03:12 PM | #16 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,593
|
Re: Tach Not Working on 670 Swap
Bump
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
My Trail Hog just stopped working, and then started working again. | Electric EZGO | |||
Battery Charger Not Working - Cart Not Working | Electric EZGO | |||
Tach not working on Yamaha G22a | Gas Yamaha | |||
Tach stopped working | Gas Club Car | |||
Equus tach not working | Big Block Talk! |