Big Battery 48v Husky wiring question.

[crashxx]

Hello, I have a 48v Big Battery Husky and their charger. The kit came with a Anderson connector Y cable. I'm trying to figure out if I can use the Y cable and run one side to the controller and the other to the charger. There were no instructions so I wanted to make sure I wasn't going to do anything to damage the battery or controller.

[bronsonj]

That's what I assumed. The controller won't be hurt if it's connected to the battery and charger. The charger won't be hurt if it's connected to the battery and controller. The battery won't care what else it's connected to.

It is surprising that they didn't include a little wiring diagram though.

[crashxx]

I think I'm going to move up to 2ga cables instead of the 6ga that came with the kit. If I run from my battery to a buss bar and then to the controller, can I bring my charger into the buss bar and have it work correctly? I can't find a Anderson Y cable in 2ga. Probably not enough room in the connector for 2 2ga cables.