PDG Cart - Controller Progamming

[Silvr_Scream]

Good Evening all,

I have a PDG Cart bought from my local Rural King here in Ohio. I am looking to adjust the acceleration and top speed on the cart. Been speaking with Gnarly Matt on Facebook and order the correct cable from him. He also provided where to find the software for evolution carts as they use an FJ controller. He is concerned that the software might not communicate as this cart is a PDG private label cart. I will be getting the cable here shortly from him and just want to be prepared for any issues with the software when I get the cable. Any assistance is appreciated.

Thank You,

[evoster]

Originally Posted by Silvr_Scream

Good Evening all,

I have a PDG Cart bought from my local Rural King ... they use an FJ controller.

What's the model number on that controller? Can you post a picture of the label?

[Silvr_Scream]

Originally Posted by evoster

What's the model number on that controller? Can you post a picture of the label?

Best picture I have on my phone. It is the same on listed on gorilla. https://gorillaridesshop.com/product...4eb7bf5b&_ss=r

[evoster]

So it's this controller? Yeah I agree with Matt, the stock evolution FJ Programming Tool SW found in this group should work fine

[Silvr_Scream]

Originally Posted by evoster

So it's this controller? Yeah I agree with Matt, the stock evolution FJ Programming Tool SW found in this group should work fine

Yes that would be the correct one. Matt mentioned that I may have trouble with the software accessing it due to needing the PDG License. Any thoughts on that?

Thank You,

[evoster]

Originally Posted by Silvr_Scream

I may have trouble with the software accessing it due to needing the PDG License.

The controller has IDs that need to align with your license or you'll get an error message and you'll be dead in the water. But a lot of the knock off cars seem to be working with the hdk/tao licenses so I'd be optimistic.

If you want some more details, I have a post in this group about FLIC internals.

[K_2]

Originally Posted by evoster

So it's this controller? Yeah I agree with Matt, the stock evolution FJ Programming Tool SW found in this group should work fine

Good morning. Not to hijack this thread. I have the 2023 PDG cart and the Model number I have is the same but ends in -06.

Could I get a PM or help acquiring a cable and software to mod this cart. <---newb

[evoster]

Originally Posted by K_2

Good morning. Not to hijack this thread. I have the 2023 PDG cart and the Model number I have is the same but ends in -06.

Could I get a PM or help acquiring a cable and software to mod this cart. <---newb

Go to this site and identify your controller.

https://www.cartcables.com/pages/pdg...oller-id-guide

You can buy the correct cable from that website or eBay. Matt (cart cables) can suggest where to locate the needed software

[chiger]

The controller is the same as the one shown above so I am sure it is a FJ controller.....
The Error message is "Unauthorized access to the device! Please update the license file."