2005 Precedent right rear brake light

selfstorage · 04-27-2011, 12:05 PM

There have ben several posts, but no seeming resolution. I purchased a new light to replace my right rear brake light, and it still does not work. The light works when lights are on, and the left brake light works but the right does not. Brake light switch seems OK, there is perfect operation for the left light.
I am a non techie, and maybe the wires are crossed. There are three wires, black brown and red. Which one goes where? There are three ports on the connector, one of them has the flat bottom, lets say that is on the right, position 1. What colors go to each position?

Please help a novice get his brake lights working!

Feel free to call me...

rk@askrk.com
877 622-5508
I am AZ...Pacific time.

OLD MEC · 04-27-2011, 05:16 PM

Most combo using turn signal-lights-turn kits for right rear use following wiring for ground ( BLACK ), tail light ( RED ), stop-turn light wires ( BROWN ). If this combo does not work using a volt-amp-ohm meter check as one lead will be metal base ground and then its only a matter of isolating stop and tail.

GLEEMO · 04-28-2011, 08:50 PM

04-27-2011, 12:05 PM	#1
selfstorage Not Yet Wild Join Date: Apr 2011 Posts: 1	2005 Precedent right rear brake light There have ben several posts, but no seeming resolution. I purchased a new light to replace my right rear brake light, and it still does not work. The light works when lights are on, and the left brake light works but the right does not. Brake light switch seems OK, there is perfect operation for the left light. I am a non techie, and maybe the wires are crossed. There are three wires, black brown and red. Which one goes where? There are three ports on the connector, one of them has the flat bottom, lets say that is on the right, position 1. What colors go to each position? Please help a novice get his brake lights working! Feel free to call me... rk@askrk.com 877 622-5508 I am AZ...Pacific time.
selfstorage Not Yet Wild Join Date: Apr 2011 Posts: 1

04-27-2011, 05:16 PM	#2
OLD MEC Gone Wild Join Date: Mar 2009 Location: South Texas Posts: 2,391	Re: 2005 Precedent right rear brake light Most combo using turn signal-lights-turn kits for right rear use following wiring for ground ( BLACK ), tail light ( RED ), stop-turn light wires ( BROWN ). If this combo does not work using a volt-amp-ohm meter check as one lead will be metal base ground and then its only a matter of isolating stop and tail.

04-28-2011, 08:50 PM	#3
GLEEMO just leave me alone Join Date: Aug 2008 Location: Tennessee Posts: 5,643	Re: 2005 Precedent right rear brake light bump

Similar Threads
Thread	Forum
Precedent brake light switch power comes from??	Electric Club Car
2004 Precedent Brake light stays on for 30 seconds	Electric Club Car
Precedent Brake Light Shorting Out	Electric Club Car
light wiring for 2005 precedent club car	Electric Club Car
Help; Precedent Brake Light Switch	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum