|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-20-2021, 10:56 AM | #1 |
Gone Wild
Join Date: Aug 2016
Posts: 612
|
G29 has a grinding in rear end when pedal is pressed but no movement
G29 has a grinding in the rear end when the pedal is pressed but the cart won't move in forward or reverse. Both hubs look good so they're not stripped out. Any idea where to go to next? I've never tore into one of these rear ends but I imagine it's not an easy task. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-20-2021, 11:27 AM | #2 |
Gone Wild
Join Date: Sep 2010
Location: Florida
Posts: 1,895
|
Re: G29 has a grinding in rear end when pedal is pressed but no movement
Your gunna want to put cart in tow, disconnect main positive, label all the motor wires and pull the motor...it sounds like maybe your motor coupler or input shaft may have stripped out. both may be worn...be careful when you take the three 10 mm bolts off that are holding the motor on because if they(splines) are indeed stripped out the motor will want to fall out as the last bolt is removed and the motor is very heavy so brace for that as well. That's where I would start...
|
09-20-2021, 02:14 PM | #3 |
Gone Wild
Join Date: Aug 2016
Posts: 612
|
Re: G29 has a grinding in rear end when pedal is pressed but no movement
10-4 thanks bud
Sent from my iPhone using Tapatalk |
11-17-2021, 12:57 AM | #4 |
Not Yet Wild
Join Date: Nov 2021
Posts: 3
|
Re: G29 has a grinding in rear end when pedal is pressed but no movement
I had the same issue and upon taking the motor off, the input shaft splines were fine. Took the rear end out and opened it up to find the intermediate lower gear was completely worn away! Lots of research, head-scratching and I've learned that the "white tag" Team rear ends, like mine (2007-early 2008 models) had bad gears in them. Particularly the input and intermediate gears were soft and made out of bad metal. I sourced a 2010 "yellow tag" rear end intermediate and input gear. Going to see if I can get it back up and running soon! BTW - You can't get the intermediate gears from Yamaha right now. I hope it's not the same problem you have! I'm about ready to toss the towel.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
03 Series - no movement - grinding in rear end | Electric EZGO | |||
Grinding sound from rear end when I let off the go pedal | Electric EZGO | |||
No movement if accelerator pressed to quickly? | Electric Club Car | |||
97 txt surges when pedal pressed | Electric EZGO | |||
jerking as soon as pedal is pressed | Electric Club Car |