10 spline or 19 spline?

lilvampshark · 12-25-2015, 10:40 PM

I have a 94 club car. I assume that it's a 10 spline . I'm about to rebuild a g19 using the club car motor *if possible * will the 10 spline fit or can I modify the motor to fit? Yes I know it will take modification for the wiring to work.

cgtech · 12-25-2015, 11:23 PM

G19 is 19 spline. Its not able to accept a 10 spline motor, even with extensive modification. The two designs are so different (mechanically & physically), its not worth it. Just find a 48v 19 spline sepex motor. The motor cannot be "re-wired" by "swapping a plug here & a connection there", to turn a series motor into a sepex motor would require some significant engineering to make it compatible with the G19 controller (electrically speaking, sepex controllers require a sepex motor that is also matched to the controller's field output).

lilvampshark · 12-25-2015, 11:48 PM

Thanks. Electronicly I was going to gut the g19 and use a altrax controller . But if it won't fit it won't fit. Thanks

12-25-2015, 10:40 PM	#1
lilvampshark Not Yet Wild Join Date: Jan 2012 Location: South Atl, Ga Posts: 27	10 spline or 19 spline? I have a 94 club car. I assume that it's a 10 spline . I'm about to rebuild a g19 using the club car motor if possible will the 10 spline fit or can I modify the motor to fit? Yes I know it will take modification for the wiring to work.

12-25-2015, 11:23 PM	#2
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: 10 spline or 19 spline? G19 is 19 spline. Its not able to accept a 10 spline motor, even with extensive modification. The two designs are so different (mechanically & physically), its not worth it. Just find a 48v 19 spline sepex motor. The motor cannot be "re-wired" by "swapping a plug here & a connection there", to turn a series motor into a sepex motor would require some significant engineering to make it compatible with the G19 controller (electrically speaking, sepex controllers require a sepex motor that is also matched to the controller's field output).

12-25-2015, 11:48 PM	#3
lilvampshark Not Yet Wild Join Date: Jan 2012 Location: South Atl, Ga Posts: 27	Re: 10 spline or 19 spline? Thanks. Electronicly I was going to gut the g19 and use a altrax controller . But if it won't fit it won't fit. Thanks

Similar Threads
Thread	Forum
anyone put a 10 spline spicer rear to 19 spline amd motor	Electric EZGO
19/2 spline	Electric EZGO
PQ 10 Spline	Golf Carts and Parts
04 pds spline bumper	Electric EZGO
Spline lube	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum