lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-04-2019, 10:59 AM   #1
bjorn773
Not Yet Wild
 
Join Date: Jun 2019
Posts: 61
Default EZGO Predator Swap- kill switch?

I'm getting close to firing up my cart and working in the last few details. I finished my exhaust(at least version 1.0)The predator has a grounded kill switch, but the cart has a 12v switch on accelerator pedal. I see two options. 1, add a second switch at the accelerator or 2, turn the idle down so low it won't idle when I'm off the gas pedal. I'm assuming the latter is the way to go. Please advise, thanks.

Sent from my SM-G930V using Tapatalk
bjorn773 is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps


Thread Tools
Display Modes


Similar Threads
Thread Forum
Finally started my EZGO Predator Swap Clone Engine Swaps
Which secondary Clutch for EZGO with 670cc Predator swap Clone Engine Swaps
Ezgo predator swap issues Clone Engine Swaps
88 CC DS Clone swap: the kill wire Clone Engine Swaps
Key switch & Kill switch question Gas Club Car


All times are GMT -5. The time now is 07:29 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.