04-26-2019, 07:26 AM | #1 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Home made lift
I had a request for photo of a 1/2 inch home made lift I made a while back. I could not see how to include it in a PM so I will post it here this way others can see it if they want the ideal as well. I used two pieces of 1/4 by 1 1/2 inch steel. Also made one of 1/2 inch al
IMG_0219.jpg IMG_0220.jpg |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-26-2019, 07:39 AM | #2 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: Home made lift
This is the one made of Al. BTW these photos were taken before I knew how to hold the iPhone.
IMG_0229.jpg |
04-26-2019, 07:40 AM | #3 |
Gone Wild
Join Date: Oct 2018
Posts: 595
|
Re: Home made lift
Did you need to extend the bolts? Got any before and after pics? How much lift did it net?
Sent from my iPhone using Tapatalk |
04-26-2019, 07:53 AM | #4 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: Home made lift
I used 1/2 inch longer grade 5 bolts. This lift with HD rear springs allow for 20 inch tires with no rubbing. Notice I put the block above the spring against the frame so you still have your front end alignment adjustments. I have an after photo with 20 inch tires.
IMG_0217.jpg |
04-26-2019, 09:07 AM | #5 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Home made lift
Ingenuity at its best!
|
04-26-2019, 10:06 AM | #6 |
Not Yet Wild
Join Date: Apr 2019
Location: WPB Fl.
Posts: 67
|
Re: Home made lift
Nice! I used 1" boxed steel and the alignment pin fit perfect in the hole for it. I also used the longer bolts. In back I used flat steel and made my own 6" brackets.
|
04-26-2019, 11:00 PM | #7 | |
Gone Wild
Join Date: Oct 2018
Posts: 595
|
Re: Home made lift
Quote:
How much lift did you get with 6” shackles? Was that center to center for the bolt holes? Sent from my iPhone using Tapatalk |
|
04-26-2019, 11:01 PM | #8 | |
Gone Wild
Join Date: Oct 2018
Posts: 595
|
Re: Home made lift
Quote:
That looks great! Sent from my iPhone using Tapatalk |
|
04-27-2019, 10:07 AM | #9 |
Not Yet Wild
Join Date: Apr 2019
Location: WPB Fl.
Posts: 67
|
Re: Home made lift
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G8 - Home made lift kit | Gas Yamaha | |||
Home made Z lift for CC DS | Lifted Golf Carts | |||
gas CC home made lift | Design Center | |||
home-made lift kit | Electric EZGO | |||
Home made lift kit?? | Lifted Golf Carts |