2003 workhorse wiring diagram

[Goob]

I have a 2003 workhorse ST480 with a briggs & stratton engine it will not shut off with the foot pedal I think it may be the switch I need a wiring diagram if anyone knows where I could find one thanks!

[Goob]

Any suggestions on why briggs engine will not shut off when foot pedal is up,I have been grounding the stud on the fan shround to the coils to kill it!

[big mule]

Try this...……> https://www.manualslib.com/manual/15...page=69#manual

[meimk]

You will need to create a kill system. The original Robin 2 cylinder engine had a pulsar, module & coil system. It took (+) power from the ignition switch to power the coil and module. The Briggs has a magneto type coil that generates it's own power to create the spark. I have used a relay on those to hold the ground path "open" when the engine is running and let it close to ground when the pedal is released to kill the spark.

[Goob]

I bypassed the ignition shut off module with a short wire,it now shuts off with the pedal thanks for the suggestions!

[JodysCars]

Is it still working?