big block power, here i come!!!

johnusarmy · 05-26-2008, 09:22 PM

hey there tom, yup i lost drive both ways, i think i might have sheared the teeth on the ring and pinion. i kinda needed an excuse to get the high speed gears, will i loose slot of the bottom end torque?

BigBlockMan · 05-26-2008, 09:44 PM

John
First, WELCOME HOME MAN, AND THANKS FOR YOUR SERVICE. WE ARE GLAD TO HAVE YOU BACK!

Next
Unless you put a blower and nitrous on there you didn't strip those two gears. They are 1" wide helical cut and will take way more than what you threw at em. What year club and what size tires did you end up running.

johnusarmy · 05-26-2008, 09:58 PM

well the rear end is a 91 model, im running 26 in blackwater tires.. i gotta look into it yet , i had the rear welded also but the welds let loos to, so might have grenaded the differential. hey, i love the lift, good quality!!

BigBlockMan · 05-26-2008, 10:09 PM

Yeah you need to figure out if it is the F&R unit or the diff, Sound like if might be in the diff if you have that loose weld floating around in there.

johnusarmy · 05-28-2008, 12:49 AM

thanks for the warm welcome, it is definetly nice to be home again!!! im going to sneak some garage time in tommorow. ill let u know what i find.

johnusarmy · 05-28-2008, 10:53 PM

well here is the problem.. seems the welds let go in the rear and must have lodged in between the gears and split out the side of the carrier, so if any one knows where i can find a new carrier for tthis baby, pm me or let me know, please!!

johnusarmy · 06-27-2008, 03:27 PM

well i actually was able to do some fancy welding to make this all work, i welded the gears together inside the carrier, it is solid now, definetly shouldnt have any more issues with this. i love the power that big block give me, to cool!!!

05-26-2008, 09:22 PM	#71
johnusarmy Gone Wild Join Date: Mar 2008 Posts: 291	Re: big block power, here i come!!! hey there tom, yup i lost drive both ways, i think i might have sheared the teeth on the ring and pinion. i kinda needed an excuse to get the high speed gears, will i loose slot of the bottom end torque?
johnusarmy Gone Wild Join Date: Mar 2008 Posts: 291

05-26-2008, 09:44 PM	#72
BigBlockMan Gone Wild Join Date: Feb 2007 Location: Southwest Georgia Posts: 1,469	Re: big block power, here i come!!! John First, WELCOME HOME MAN, AND THANKS FOR YOUR SERVICE. WE ARE GLAD TO HAVE YOU BACK! Next Unless you put a blower and nitrous on there you didn't strip those two gears. They are 1" wide helical cut and will take way more than what you threw at em. What year club and what size tires did you end up running.

05-26-2008, 10:09 PM	#74
BigBlockMan Gone Wild Join Date: Feb 2007 Location: Southwest Georgia Posts: 1,469	Re: big block power, here i come!!! Yeah you need to figure out if it is the F&R unit or the diff, Sound like if might be in the diff if you have that loose weld floating around in there.

05-28-2008, 12:49 AM	#75
johnusarmy Gone Wild Join Date: Mar 2008 Posts: 291	Re: big block power, here i come!!! thanks for the warm welcome, it is definetly nice to be home again!!! im going to sneak some garage time in tommorow. ill let u know what i find.
johnusarmy Gone Wild Join Date: Mar 2008 Posts: 291

06-27-2008, 03:27 PM	#77
johnusarmy Gone Wild Join Date: Mar 2008 Posts: 291	Re: big block power, here i come!!! well i actually was able to do some fancy welding to make this all work, i welded the gears together inside the carrier, it is solid now, definetly shouldnt have any more issues with this. i love the power that big block give me, to cool!!!
johnusarmy Gone Wild Join Date: Mar 2008 Posts: 291

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
I need a big block	Gas Club Car
big block	Gas Yamaha
Big Block G1 ???	Gas Yamaha