|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
|
07-07-2019, 11:10 PM | #1 |
Getting Wild
Join Date: Jun 2018
Location: Ontario Canada
Posts: 122
|
New Alltrax controller
Hello again, still trying to get this cart figured out, I got a new 400 amp solenoid and a new Alltrax XCT 400 controller coming tomorrow, my question is do I use the resistor that comes with the solenoid, or the diode that comes with the controller to go on the larger studs of the solenoid—- sorry if this is a no brainer question, I just don’t want any more problems. The cart in a 2008 EZGO 36v PDS. Thanks
|
07-07-2019, 11:59 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: New Alltrax controller
Both, it is layed out in the diagram in the book with the new controller.
|
07-08-2019, 12:00 AM | #3 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: New Alltrax controller
Will be better once you have your hands on the parts & The Diagram. We will get you through this no problem.
|
07-08-2019, 01:14 AM | #4 |
Getting Wild
Join Date: Jun 2018
Location: Ontario Canada
Posts: 122
|
Re: New Alltrax controller
Great —— thank you
|
07-08-2019, 11:04 AM | #5 |
Getting Wild
Join Date: Jun 2018
Location: Ontario Canada
Posts: 122
|
Re: New Alltrax controller
Well I received the new controller, but there aren’t any diodes included with it, so I don’t know if I use the one I received with the solenoid or have to order the 6A Regen diode ?——Thanks for any help in clearing this up
|
07-08-2019, 11:10 AM | #6 |
Gone Wild
Join Date: Nov 2016
Location: near Calgary, AB, Canada
Posts: 1,516
|
Re: New Alltrax controller
I suggest calling the Alltrax technical support line. They should be able to give you the right advice your application.
|
07-08-2019, 11:35 AM | #7 |
Getting Wild
Join Date: Jun 2018
Location: Ontario Canada
Posts: 122
|
Re: New Alltrax controller
Thanks I will try that
|
07-08-2019, 09:14 PM | #8 | |
Gone Wild
Join Date: Apr 2017
Location: SE TN
Posts: 2,226
|
Re: New Alltrax controller
Quote:
|
|
07-08-2019, 10:18 PM | #9 |
Getting Wild
Join Date: Jun 2018
Location: Ontario Canada
Posts: 122
|
Re: New Alltrax controller
I called Alltrax and they advised me to reverse the A1 and A2 cables on the motor, I did, but it didn’t make any difference, I’ll call them again tomorrow
|
07-09-2019, 10:13 AM | #10 | |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: New Alltrax controller
Quote:
Sent from my SM-G930R4 using Tapatalk |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax controller | Electric Club Car | |||
Used Alltrax Controller | Golf Carts and Parts | |||
Need a little help with Alltrax controller | Electric Club Car | |||
Used Alltrax controller | Golf Carts and Parts | |||
Alltrax 650 amp Axe controller | Electric Club Car |