|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
10-26-2013, 02:52 PM
|
#1 |
|
Gone Wild
Join Date: Jun 2011
Posts: 441
|
My EzGo is a 98. How can I tell if its an early 98 or late 98?
I need a front axle for my cart and I've found some sites that have it but they have one part number for a early 98 and another part number for a late 98. How do I tell which one I need. My cart has a plate with a manufacture code and serial number. Can I determine the month my cart was made by these numbers?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-26-2013, 03:14 PM
|
#2 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,068
|
Re: My EzGo is a 98. How can I tell if its an early 98 or late 98?
I believe there was a square straight axle and an axle that was straight but taller than it was wide. Which one do you have?
|
|
|
|
10-26-2013, 03:21 PM
|
#3 |
|
Gone Wild
Join Date: Jun 2011
Posts: 441
|
Re: My EzGo is a 98. How can I tell if its an early 98 or late 98?
Mine is taller than it is wide.
|
|
|
|
|
10-26-2013, 03:33 PM
|
#4 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,068
|
Re: My EzGo is a 98. How can I tell if its an early 98 or late 98?
I believe what you have is part number 70539. I think the square one will work also but not sure. I think I may have one of each so I will look and measure if I can..
|
|
|
|
|
10-26-2013, 03:35 PM
|
#5 |
|
Gone Wild
Join Date: Jun 2011
Posts: 441
|
Re: My EzGo is a 98. How can I tell if its an early 98 or late 98?
Thanks kgsc.
|
|
|
|
|
10-26-2013, 07:34 PM
|
#6 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,068
|
Re: My EzGo is a 98. How can I tell if its an early 98 or late 98?
Measured both a square axle and one on a 96 cart that is I believe the same as yours. It measured 2 inches tall and 1 inch thick. C chambers measured the same as well as the spindle spacing.
|
|
|
|
|
10-26-2013, 07:42 PM
|
#7 |
|
Gone Wild
Join Date: Jun 2011
Posts: 441
|
Re: My EzGo is a 98. How can I tell if its an early 98 or late 98?
Yes mine is 2"x1".
|
|
|
|
|
10-26-2013, 07:47 PM
|
#8 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,068
|
Re: My EzGo is a 98. How can I tell if its an early 98 or late 98?
Then 70539G01 should be the one.
|
|
|
|
|
10-26-2013, 07:52 PM
|
#9 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,711
|
Re: My EzGo is a 98. How can I tell if its an early 98 or late 98?
98s were all the same, I think back to 1995 and boxed, in 2001.5 and after they had the plate welded on it and
C shaped with the steering mech bolted to it. (workhorse being the exception)   |
|
|
|
|
10-26-2013, 08:07 PM
|
#10 |
|
Gone Wild
Join Date: Jun 2011
Posts: 441
|
Re: My EzGo is a 98. How can I tell if its an early 98 or late 98?
That's it. Anyone got one they want to sell?.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| I have an oppurtunity to buy a late model 80's or early 90's gas cart | Gas EZGO | |||
| Late 80's or early 90's | Gas EZGO | |||
| Late 70/Early 80 EzGo resistor Cart | Electric EZGO | |||
| early or late '96 | Gas Club Car | |||
Linear Mode
