04-02-2014, 07:53 PM | #1 |
Gone Wild
Join Date: Oct 2013
Posts: 690
|
Mikuni 32 mm carb
I bought this new to experiment with on my cart. It's a genuine mikuni. I gave it a go for a couple of weeks, but it is simply too much volume for a 2pg. It will include the cable conversion kit for the choke assembly, and 2week old uni foam filter. $85 PayPal shipped.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-04-2014, 09:10 AM | #2 |
Gone Wild
Join Date: Oct 2010
Location: Central New York
Posts: 812
|
Re: Mikuni 32 mm carb
Hey before you give up on it what kind of cart do you have? Is it a stock motor? I have the exact same carb on my 23 HP Briggs and with a little jet fooling around it flies!!! Way more responsive than the stock Briggs carb and much more top end!!! I can give you my jet sizes if you want. Actually the carb doesnt even open all the way due to the slack in the cable. I dont even care cause its too fast and jumps off the line too fast now!!! Im afraid if I take the slack out my son...........or probably me will be in the hospital toot sweet!!!
|
04-04-2014, 07:23 PM | #3 |
Gone Wild
Join Date: Oct 2013
Posts: 690
|
Re: Mikuni 32 mm carb
I appreciate the advice, but sadly, mine is still only the stock 2pg. It's close, but she just can't pull enough to make it work properly. Thanks though!
|
04-05-2014, 10:29 AM | #4 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: Mikuni 32 mm carb
For the future try a smaller main jet, to large and fuel dribbles out and engine will be sluggish.
|
04-11-2014, 01:51 AM | #5 |
Getting Wild
Join Date: Feb 2010
Posts: 131
|
Re: Mikuni 32 mm carb
I'd take it for 75 shipped?
|
04-11-2014, 07:06 AM | #6 |
Gone Wild
Join Date: Oct 2013
Posts: 690
|
Re: Mikuni 32 mm carb
Do you need the air filter?
|
04-11-2014, 06:21 PM | #7 |
Getting Wild
Join Date: Feb 2010
Posts: 131
|
Re: Mikuni 32 mm carb
No I just need the carb and cable I have a air filter.
|
04-11-2014, 06:21 PM | #8 |
Getting Wild
Join Date: Feb 2010
Posts: 131
|
Re: Mikuni 32 mm carb
Do you have the rubber boot to manifold piece?
|
04-11-2014, 06:29 PM | #9 |
Gone Wild
Join Date: Oct 2013
Posts: 690
|
Re: Mikuni 32 mm carb
Ok, the filter thing is a long story. I do have the rubber flange connection, you need that also?
|
04-11-2014, 06:44 PM | #10 |
Getting Wild
Join Date: Feb 2010
Posts: 131
|
Re: Mikuni 32 mm carb
Yes I would need the flange assuming it is just like a big rubber hose on both sides or does it have bolt holes on one and open on the other?
Lol Call me it'd be easier 816-805-2047 |
|
|
Similar Threads | ||||
Thread | Forum | |||
G-9 Mikuni Carb Relocation help!!! | Clone Engine Swaps | |||
Mikuni carb upgrade questions | Clone Engine Swaps | |||
mikuni carb for big block | Golf Carts and Parts | |||
G1 mikuni carb | Gas Yamaha | |||
wtb mikuni carb | Golf Carts and Parts |