Oil pressure gauge for the twin Robins

kgsc · 03-25-2012, 08:06 AM

I went looking and couldn't find anything. Anybody ever done a oil pressure gauge on the factory twin cyclinder robins 350 ?

Thanks in advance

simple man · 03-25-2012, 10:10 AM

An automotive gauge will work just fine! I would make sure to get the optional copper line kit with it, though. I've had issues with the plastic line splitting!

Here's an example. Any automotive store will have these!
http://www.autozone.com/autozone/acc...Gauge/_/N-25ls

kgsc · 03-26-2012, 06:01 AM

Thanks sm, I guess my question should have been where do you connect it on the block ?

simple man · 03-26-2012, 07:29 AM

Quote:

Originally Posted by kgsc

Thanks sm, I guess my question should have been where do you connect it on the block ?

It is in the top of the cover by the flywheel. Here's a link to the manual. Look at page D-13.

http://products.jacobsen.com/img/manuals/27615-g01.pdf

kgsc · 03-26-2012, 08:14 PM

ok, got it thanks. I guess put a tee in where the current oil pressure switch is.. duh... sorry, brain wiff

03-25-2012, 08:06 AM	#1
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,183	Oil pressure gauge for the twin Robins I went looking and couldn't find anything. Anybody ever done a oil pressure gauge on the factory twin cyclinder robins 350 ? Thanks in advance

03-25-2012, 10:10 AM	#2
simple man Gone Wild Join Date: Aug 2011 Location: Bunnell, Florida Posts: 2,408	Re: Oil pressure gauge for the twin Robins An automotive gauge will work just fine! I would make sure to get the optional copper line kit with it, though. I've had issues with the plastic line splitting! Here's an example. Any automotive store will have these! http://www.autozone.com/autozone/acc...Gauge/_/N-25ls

03-26-2012, 06:01 AM	#3
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,183	Re: Oil pressure gauge for the twin Robins Thanks sm, I guess my question should have been where do you connect it on the block ?

03-26-2012, 08:14 PM	#5
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,183	Re: Oil pressure gauge for the twin Robins ok, got it thanks. I guess put a tee in where the current oil pressure switch is.. duh... sorry, brain wiff

Similar Threads
Thread	Forum
Robins MCI Engine	Gas EZGO
Oil pressure gauge on Vanny	Big Block Talk!
88 ezgo robins 244 cc	Gas EZGO
robins engine	Big Block Talk!
what is the diameter of 2 gauge and 4 gauge battery wire?	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum