|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
04-16-2021, 06:39 AM | #11 | |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
|
Re: Mikuni carb kit from Performance 670
Quote:
One thing, that carb is going to make you want to drive faster Be carefull not to over rev the engine or you can damage the valvetrain components. Most stock engines will safely rev up to 4000 rpm. You could install their rev kit to help prevent that and safely rev to 5000 rpm. On the stock carb, I found this carb to be easy to tune once you remove the caps on the idle circuit screws. It takes a little patience. Mine is dialed in pretty good and surprisingly it feels like there are no dead spots or sputters. |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-22-2021, 02:48 PM | #12 | |
Gone Wild
Join Date: Mar 2018
Location: South FL
Posts: 243
|
Re: Mikuni carb kit from Performance 670
Quote:
It's actually nice out today, I may throw on that new fuel pump i ordered and try to get this carb dialed in. it's been pretty nasty with rain lately here and my garage is so packed full on crap i cant work in the garage right now. |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Mikuni vm carb | Clone Engine Swaps | |||
WTB G16 Mikuni Carb | Golf Carts and Parts | |||
carb tuning mikuni or eBay CV carb | Clone Engine Swaps | |||
Carb rebuild kit for 97 Mikuni carb. | Gas Columbia ParCar | |||
Mikuni 32 mm carb | Golf Carts and Parts |