lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Extreme DC! > All things Lithium


Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-18-2019, 10:55 AM   #1
somfas
Gone Wild
 
Join Date: Sep 2012
Posts: 245
Default Leaf Lithium battery pack/box build basic questions

I am building the battery pack and want to confirm a few things first.

1. do the modules need any plates between them? I have the factory end plates (4 of them), and I have thin strips that seem to be placed between some modules based on pics I have seen on here. But I don't see the need for them.

2. I assume the modules naturally stack together with opposing terminals near each other (so that I can connect the small bus bars from positive to negative).

3. Does anyone have a diagram or pic of how to run the bus bars and the wiring for the BMS? I want to make sure I am hooking that part up right!!!

Thanks
somfas is offline   Reply With Quote
Old 06-18-2019, 08:55 PM   #2
PingEye3
Gone Wild
 
PingEye3's Avatar
Club Car
 
Join Date: Sep 2014
Location: Orlando, FL
Posts: 1,308
Default Re: Leaf Lithium battery pack/box build basic questions

Attached is a basic drawing of a 7 module 14S pack. This wiring applies to the Ali Express BMS on the leaf modules. It was originally drawn for the BMS from EV Battery Center before Nick passed away. I have others for a ZEVA BMS.

No plates need between modules.

What cart is this going into?

Pics are of an assembled pack
Attached Images
File Type: jpg IMG_20180803_154921902.jpg (304.9 KB, 0 views)
File Type: jpg IMG_20180803_154931080.jpg (323.5 KB, 0 views)
File Type: jpg IMG_20180803_154936215.jpg (330.0 KB, 0 views)
Attached Files
File Type: pdf Lithium 7 Cell Pack w WiFi - Tap Harness.pdf (343.1 KB, 0 views)
PingEye3 is offline   Reply With Quote
Old 06-20-2019, 01:46 AM   #3
cricketo
Getting Wild
 
Join Date: Nov 2018
Posts: 92
Default Re: Leaf Lithium battery pack/box build basic questions

Quote:
Originally Posted by PingEye3 View Post
Attached is a basic drawing of a 7 module 14S pack. This wiring applies to the Ali Express BMS on the leaf modules. It was originally drawn for the BMS from EV Battery Center before Nick passed away. I have others for a ZEVA BMS.

No plates need between modules.

What cart is this going into?

Pics are of an assembled pack
I may have missed your build thread... what is the source of the box in your pack ? You built it, or somebody sells these ? Thanks!
cricketo is offline   Reply With Quote
Old 06-19-2019, 06:22 AM   #4
somfas
Gone Wild
 
Join Date: Sep 2012
Posts: 245
Default Re: Leaf Lithium battery pack/box build basic questions

Wow, that looks nice PingEye! Thanks about clarifying about the plates between the modules. I see, even in the pictures above, three studs on the modules; two of which are being used to hold the wire clamps. I thought those were part of some brace but I suppose they are built onto some of the batteries? Mine is going into an EzGo. I suppose you have to make all of the wiring including the larger cables? Thanks again.
somfas is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Extreme DC! > All things Lithium


Thread Tools
Display Modes


Similar Threads
Thread Forum
DIY 101 - 14 cell Nissan Leaf lithium pack All things Lithium
Bit the bullet Leaf Lithium build Lithium EZGO
72V Lithium conversion basic questions for noobe Lithium EZGO
A look inside Nissan Leaf lithium battery pack All things Lithium
Lithium RXV build with leaf cells Electric EZGO


All times are GMT -5. The time now is 03:27 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.