EZ GO Gas---BELT HELP

keimere · 11-17-2009, 10:39 AM

I have a 1995 EZ Go Gas Cart. It has a 300cc high out put engine. It has two belts. One that is a wide belt that goes around the Drive Clutch and Driven clutch. The second is a skinnier belt. The smaller belt has come off and I do not know how to get it back on. does anyone have any idea how to do this. Please remember in your replies that I am mechanically stupid.

mikesmotortoys · 11-17-2009, 11:16 AM

You are referring to the starter belt. The starter has a long bolt that runs through the bottom mounts. You'll need a 3/4" socket and wrench to loosen. Once this is loose, then on the drivers side there is a bracket / stud with two 9/16" jam nuts that force the starter out to tighten the belt. You neen to loosen these to allow slack to get it on, then tighten it up. This is pretty basic stuff here. Maybe you should have someone help you if this doesn't make sense? No offense intended

BTW - Make sure the KEY IS OFF and / or the positive terminal is removed from your battery. We'd hate for you to loose a finger here...

keimere · 11-17-2009, 11:26 AM

thanks, and i will probably get some help. what you said sounded like chinese.
and no offense taken.

mikesmotortoys · 11-17-2009, 11:28 AM

Quote:

Originally Posted by keimere

thanks, and i will probably get some help. what you said sounded like chinese.
and no offense taken.

We're here to help when possible

sccowboy · 11-18-2009, 09:23 AM

Welcome to BGW keimere!!

scottyb · 11-18-2009, 09:40 AM

If the belt just came off maybe it is time for a new one

keimere · 11-18-2009, 09:46 AM

belt was knocked off by a big stick that was on road and got lodged in there.
i am using it in the woods and the area has just been clear cut so there are alot of small loose limbs on road.

sccowboy · 11-18-2009, 09:55 AM

It will be much easier to get at the stuff mike was telling you about if you take the airbox and carb off

keimere · 11-24-2009, 04:35 PM

Well i got the belt back on, but now it is not working. Someone told me i need to adjust the tensioner to make the belt tighter around the spindels. I believe i may have drained the battery because now it does not do anything.
Back to drawing board.

csason · 11-24-2009, 04:41 PM

You're going to need someone who has a little more mechanical
inclination to help you.. My advise is don't do anything to it.

11-17-2009, 10:39 AM	#1
keimere Not Yet Wild Join Date: Nov 2009 Posts: 13	EZ GO Gas---BELT HELP I have a 1995 EZ Go Gas Cart. It has a 300cc high out put engine. It has two belts. One that is a wide belt that goes around the Drive Clutch and Driven clutch. The second is a skinnier belt. The smaller belt has come off and I do not know how to get it back on. does anyone have any idea how to do this. Please remember in your replies that I am mechanically stupid.
keimere Not Yet Wild Join Date: Nov 2009 Posts: 13

11-17-2009, 11:16 AM	#2
mikesmotortoys Gone Wild Join Date: Mar 2008 Location: Rockwall, Texas (Dallas / Ft. Worth) Posts: 7,077	Re: EZ GO Gas---BELT HELP You are referring to the starter belt. The starter has a long bolt that runs through the bottom mounts. You'll need a 3/4" socket and wrench to loosen. Once this is loose, then on the drivers side there is a bracket / stud with two 9/16" jam nuts that force the starter out to tighten the belt. You neen to loosen these to allow slack to get it on, then tighten it up. This is pretty basic stuff here. Maybe you should have someone help you if this doesn't make sense? No offense intended BTW - Make sure the KEY IS OFF and / or the positive terminal is removed from your battery. We'd hate for you to loose a finger here...
	www.MIKESMOTORTOYS.com www.EZGOPARTSONLINE.com Factory EZGO - Bad Boy Buggy - Dixie Chopper Mowers

11-17-2009, 11:26 AM	#3
keimere Not Yet Wild Join Date: Nov 2009 Posts: 13	Re: EZ GO Gas---BELT HELP thanks, and i will probably get some help. what you said sounded like chinese. and no offense taken.
keimere Not Yet Wild Join Date: Nov 2009 Posts: 13

11-18-2009, 09:23 AM	#5
sccowboy It ain't gonna be easy. Join Date: Apr 2008 Location: St. George, SC Posts: 1,480	Re: EZ GO Gas---BELT HELP Welcome to BGW keimere!!

11-18-2009, 09:40 AM	#6
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: EZ GO Gas---BELT HELP If the belt just came off maybe it is time for a new one

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

11-18-2009, 09:46 AM	#7
keimere Not Yet Wild Join Date: Nov 2009 Posts: 13	Re: EZ GO Gas---BELT HELP belt was knocked off by a big stick that was on road and got lodged in there. i am using it in the woods and the area has just been clear cut so there are alot of small loose limbs on road.
keimere Not Yet Wild Join Date: Nov 2009 Posts: 13

11-18-2009, 09:55 AM	#8
sccowboy It ain't gonna be easy. Join Date: Apr 2008 Location: St. George, SC Posts: 1,480	Re: EZ GO Gas---BELT HELP It will be much easier to get at the stuff mike was telling you about if you take the airbox and carb off

11-24-2009, 04:35 PM	#9
keimere Not Yet Wild Join Date: Nov 2009 Posts: 13	Re: EZ GO Gas---BELT HELP Well i got the belt back on, but now it is not working. Someone told me i need to adjust the tensioner to make the belt tighter around the spindels. I believe i may have drained the battery because now it does not do anything. Back to drawing board.
keimere Not Yet Wild Join Date: Nov 2009 Posts: 13

11-24-2009, 04:41 PM	#10
csason Love my Big Block Join Date: Oct 2009 Location: Florida Posts: 1,553	Re: EZ GO Gas---BELT HELP You're going to need someone who has a little more mechanical inclination to help you.. My advise is don't do anything to it.

Similar Threads
Thread	Forum
08 ST 2+2 gas belt	Gas EZGO
1 3/16 belt?	Gas Club Car
belt # for 07 ST	Gas EZGO
belt help?	Gas Yamaha
Wet belt	Gas Club Car