|
12-04-2024, 11:43 AM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2019
Posts: 27
|
Lithium swap with Alltrax...high amp "Mexico" fuse
Just curious, I'm will be upgrading my Drive2 to a single battery lithium unit. My question is will I still need to use the large 250amp(?) "Mexico" fuse? I'm guessing so, but just wanted to know from others who have done the upgrade. Thanks in advance.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-04-2024, 02:33 PM
|
#2 |
|
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,927
|
Re: Lithium swap with Alltrax...high amp "Mexico" fuse
I always use that fuse with Alltrax controllers. They come with a fuse.
|
|
|
|
12-04-2024, 03:00 PM
|
#3 |
|
Not Yet Wild
Join Date: Aug 2019
Posts: 27
|
Re: Lithium swap with Alltrax...high amp "Mexico" fuse
Thanks for the reply. I guess most controller upgrades I see on install videos and such, are Navitas. Just wanted to double check. Thanks
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| New Admiral B2 "high speed" motor installed- no faster | Electric EZGO | |||
| High pitch "sing" going forward | Electric Club Car | |||
| Precedent project "PIN HIGH" | Members Rides | |||
| G16 Clutch Swap and "Hot Setup" questions (technical) | Gas Yamaha | |||
| "High Speed Switch" ? | Electric Club Car | |||
Linear Mode
